Hi! > > > > No idea really. I only have N900 working with linux at the moment. I'm > > > > trying to get N9 and N950 working, but no luck so far. > > > > > > Still no? :-( > > > > > > Do you know if you get the kernel booting? Do you have access to the serial > > > console? I might have seen the e-mail chain but I lost the track. What > > > happens after the flasher has pushed the kernel to RAM and the boot starts? > > > It's wonderful for debugging if something's wrong... > > > > Still no. No serial cable, unfortunately. Flasher seems to run the > > kernel, but I see no evidence new kernel started successfully. I was > > told display is not expected to work, and on USB I see bootloader > > disconnecting and that's it. > > > > If you had a kernel binary that works for you, and does something I > > can observe, that would be welcome :-). > > I put my .config I use for N9 here: > > <URL:http://www.retiisi.org.uk/v4l2/tmp/config.n9> > > The root filesystem is over NFS root with usbnet. You should see something > like this in dmesg: > > [35792.056138] usb 2-2: new high-speed USB device number 58 using ehci-pci > [35792.206238] usb 2-2: New USB device found, idVendor=0525, idProduct=a4a1 > [35792.206247] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [35792.206252] usb 2-2: Product: Ethernet Gadget > [35792.206257] usb 2-2: Manufacturer: Linux 4.13.0-rc1-00089-g4c341695f3b6 with musb-hdrc Could not get it to work, same result as usual: no response on the device, disconnect on USB and then quiet. Could I get actual zImage-dtb from you? What development options are enabled in your case? I was mostly using none -- sudo ../maemo/0xffff/src/0xFFFF -F "" -R 0 . Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
