Hi, Seems like you are on a hot trail here ... Great ! What can I do to test your hypothesis on the EM2881_BOARD_DNT_DA2_HYBRID ? May be I can verify if analog works ? How are my chances in getting DVB supported ? TIA for your time and effort in helping out. Best Regards, Johan 2009/11/7 Magnus Alm <magnus.alm@xxxxxxxxx>: > I think your stick has more in common with > EM2881_BOARD_DNT_DA2_HYBRID, dvb support hasn't been enabled for that > tuner yet tho, only analog.. > > If you look at pdf for the utvhyl3 (seems like they removed the > utvhyl2) http://idream.com.hk/consulter.php?pid=120&tab=6 > And compares it with the DNT DA2 , > http://www.dnt.de/neu/data/download/files/110/Prospekt%20-%20DA2%20Hybrid.pdf > (only avalible in german tho) > They even seem to have the same remote (doesn't mean they are identical tho.) > > /Magnus Alm > > 2009/11/7 Magnus Alm <magnus.alm@xxxxxxxxx>: >> Well, maybe you where more right than me... >> >> From em28xx-dvb.c >> >> case EM2880_BOARD_TERRATEC_HYBRID_XS: >> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >> dvb->frontend = dvb_attach(zl10353_attach, >> &em28xx_zl10353_xc3028_no_i2c_gate, >> &dev->i2c_adap); >> if (dvb->frontend == NULL) { >> /* This board could have either a zl10353 or a mt352. >> If the chip id isn't for zl10353, try mt352 */ >> dvb->frontend = dvb_attach(mt352_attach, >> &terratec_xs_mt352_cfg, >> &dev->i2c_adap); >> } >> >> >> 2009/11/7 Magnus Alm <magnus.alm@xxxxxxxxx>: >>> Hi >>> >>> I read some where that trying different card types for a DVB tuner can >>> potentially cause damage to them. >>> >>> You are probably right about the firmare. >>> Do you have a link to the manufacture of your stick? >>> I tried to google the name of it but couldn't found an exact match. >>> >>> The EM2881_BOARD_PINNACLE_HYBRID_PRO uses it's XC3028 to getter with a >>> ZARLINK456 >>> as you can see from the following line in em28xx-cards.c >>> >>> case EM2881_BOARD_PINNACLE_HYBRID_PRO: >>> ctl->demod = XC3028_FE_ZARLINK456; >>> break; >>> >>> It is probably not compliant with your Zarlink MT352. >>> >>> There is a mt352 module tho, but I guess it doesn't get loaded when >>> you plug your stick in. >>> >>> I'll pooke around a bit..... >>> >>> PS >>> Use the "reply all", so others can see your mails, since I'm probably >>> one of the least competent guys/gals on this mailing list. >>> DS >>> >>> >>> >>> 2009/11/7 Johan Mutsaerts <johmut@xxxxxxxxx>: >>>> Hi Magnus, >>>> >>>> Thanks for a quick reply. Here is some more detailed information: >>>> >>>> My USB device ID is 0xeb1a:0x2881 it is eMPIA based. >>>> >>>> These are the components inside >>>> - Empia EM2880 >>>> - Texas Instruments 5150AM1 >>>> - XCeive XC3028 >>>> - Empia EMP202 >>>> - Zarlink MT352 >>>> >>>> Difficult for me to get to the windows stuff.... >>>> >>>> No /dev/dvb/.... is generated ? Could it have something to do with no Firmware ? >>>> >>>> I found my device to be quite similar to the Pinnacle Hybrid Pro so I tried >>>> sudo rmmod em28xx-dvb >>>> sudo rmmod em28xx-alsa >>>> sudo rmmod em28xx >>>> sudo modprobe em28xx card=53 and card=56 >>>> sudo modprobe em28xx-alsa >>>> sudo modprobe em28xx-dvb >>>> However with not much success. >>>> Card=53 cased MeTV to see a tuner but no channels could be found.... >>>> >>>> TIA for any assistance you can provide. >>>> >>>> Best Regards, >>>> Johan >>>> >>>> 2009/11/7 Magnus Alm <magnus.alm@xxxxxxxxx>: >>>>> Hi! >>>>> >>>>> The dmesg didn't reveal what tuner your stick/card has, it's probably >>>>> a XC2028/XC3028 or something like that. >>>>> Easiest way to find out would be if you could open the cover and have >>>>> a look inside. >>>>> >>>>> If you have access to windows and the pvr program that came with the >>>>> tuner you could do a usb-sniff. >>>>> >>>>> http://www.pcausa.com/Utilities/UsbSnoop/ >>>>> or >>>>> http://benoit.papillault.free.fr/usbsnoop/ >>>>> >>>>> Switch between different inputs while doing the log, like "dvb", >>>>> "analog" and if it has "svideo"/"composite" input. >>>>> >>>>> copy the windows log to unix and parse the output with parser.pl (I've >>>>> added is as an attachment.) >>>>> I think there is a new parser somewhere, but I forgot the name of it. >>>>> >>>>> I'm also not sure how I used it, but I think it was like this: perl >>>>> parser.pl < "your_windows_log" > "parsed_log" >>>>> That log is needed to find out what "gpio" your tuner needs for >>>>> different settings. >>>>> >>>>> Don't be scared of the size of the windows log, it gets large, often a >>>>> few hundred MB. >>>>> The parsed log is much smaller, a few hundred KB. >>>>> >>>>> That is all I can think about atm. >>>>> >>>>> /Magnus Alm >>>>> >>>>> >>>>> 2009/11/6 Johan Mutsaerts <johmut@xxxxxxxxx>: >>>>>> Hi, >>>>>> >>>>>> I have an iDream UTVHYL2 USB TV Tuner (with IR remote control) that I >>>>>> cannot get to work with Ubuntu (9.04, 2.6.28-16). I have successfully >>>>>> compiled and installed the em28xx-new driver from linuxtv.org. No >>>>>> /dev/dvb/adapter... is created and that is where it ends for me know. >>>>>> MyTV claims no adapter is detected. >>>>>> >>>>>> I have attached the output of lsusb and dmesg as requested... >>>>>> >>>>>> Please let me know what more I can do and what exactly it is you can do ? >>>>>> >>>>>> Thanks in advance and >>>>>> Best Regards, >>>>>> Johan (Belgium) >>>>>> >>>>> >>>> >>> >> > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
