Re: Poor reception with Hauppauge HVR-1600 on a ClearQAM cable feed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 14, 2009 at 11:12 PM, Andy Walls <awalls@xxxxxxxxx> wrote:
> On Wed, 2009-10-14 at 12:01 +0100, Simon Farnsworth wrote:
>> Andy Walls wrote:
>> > Have your remote user read
>> >
>> > http://www.ivtvdriver.org/index.php/Howto:Improve_signal_quality
>> >
>> > and take any actions that seem appropriate/easy.
>> >
>> I'll try that again - they're grouching, because their TV is fine, and
>> the same card in a Windows PC is also fine. It's just under Linux that
>> they're seeing problems, so I may not be able to get them to co-operate.
>
>
> Right, the windows driver code for the mxl5005s is better.  Inform him
> that the linux driver for the mxl5005s could be better.  If he has any
> contacts at MaxLinear to get the datasheet and programming manual
> released to me, I can make the linux driver better.

I've got the datasheet.  It's just one of those projects on my list
where I have to get around to hooking up the i2c analyzer to a running
board, capture the block that gets programmed into the chip under
Windows, and compare the bits against Linux.

I've just been tied up in too much other stuff to do the legwork required.

Devin

-- 
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux