On Thu, Oct 8, 2009 at 2:23 PM, Miroslav Pragl <lists.subscriber@xxxxxxxx> wrote: > Devin, > thank you very much. > > I downloaded, compiled and installed drivers from current (today) hg > repository o linuxtv.org, attached Pinnacle dongle, scanned. > > The log files are quite large so i ZIPed them and made available at > http://pragl.com/tmp/em28xx_logs.zip > They are: > > 1. messages.txt - relevant paert of /var/log/messages after plugging the > dongle in > > 2. scan.txt - output from `scan cz-Praha` (my location) you can see scan > locks on first frequency (634000000), finds correctly couple of channels > then fails on other frequencies > > 3. scan2.txt - same scan but I commented-out 1st frequency (634000000) so > scan successfully starts from following one (674000000) and the situation > repeats - only this one gets scanned, following are not > > Hope I described it clearly :) > > I really appreciate your help Interesting. I just looked at SebaX75's usbmon trace, and I have a suspicion as to what is going on. If one of you is feeling adventurous, try the following unplug the device comment out line 181 of file v4l/em28xx-cards.c so it looks like: // {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ make && make install && make unload plug in device Attempt a scan Let me know if that causes it to lock on more than just the first frequency. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
