Hi! > > +Mandatory properties > > +-------------------- > > + > > +- compatible: "toshiba,et8ek8" > > +- reg: I2C address (0x3e, or an alternative address) > > +- vana-supply: Analogue voltage supply (VANA), 2.8 volts > > +- clocks: External clock to the sensor > > +- clock-frequency: Frequency of the external clock to the sensor. Camera > > + driver will set this frequency on the external clock. > > This is fine if the frequency is fixed (e.g. an oscillator), but you > should use the clock binding if clocks are programable. It is fixed. So I assume this can stay as is? Or do you want me to add "The clock frequency is a pre-determined frequency known to be suitable to the board." as Sakari suggests? > > +- reset-gpios: XSHUTDOWN GPIO > > Please state what the active polarity is. As in "This gpio will be set to 1 when the chip is powered." ? Thanks, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Attachment:
signature.asc
Description: Digital signature
