On 07/21/2016 10:14 AM, Songjun Wu wrote: > The Image Sensor Controller driver includes two parts. > 1) Driver code to implement the ISC function. > 2) Device tree binding documentation, it describes how > to add the ISC in device tree. > > Test result with v4l-utils 1.10.1 Please compile from the v4l-utils repository. The version you used here is out-of-date. I continually add new tests, so always compile the latest version from the repo. Regards, Hans > Driver Info: > Driver name : atmel_isc > Card type : Atmel Image Sensor Controller > Bus info : platform:atmel_isc f0008000.isc > Driver version: 4.7.0 > Capabilities : 0x84200001 > Video Capture > Streaming > Extended Pix Format > Device Capabilities > Device Caps : 0x04200001 > Video Capture > Streaming > Extended Pix Format > > Compliance test for device /dev/video0 (not using libv4l2): > > Required ioctls: > test VIDIOC_QUERYCAP: OK > > Allow for multiple opens: > test second video open: OK > test VIDIOC_QUERYCAP: OK > test VIDIOC_G/S_PRIORITY: OK > > Debug ioctls: > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 1 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Test input 0: > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported) > test VIDIOC_QUERYCTRL: OK (Not Supported) > test VIDIOC_G/S_CTRL: OK (Not Supported) > test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported) > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 0 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK > test VIDIOC_G/S_PARM: OK > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK > test VIDIOC_TRY_FMT: OK > test VIDIOC_S_FMT: OK > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK > test VIDIOC_EXPBUF: OK > > Test input 0: > > Stream using all formats: > test MMAP for Format BA81, Frame Size 640x480: > Stride 640, Field None: OK > test MMAP for Format YUYV, Frame Size 640x480: > Stride 1280, Field None: OK > > Total: 44, Succeeded: 44, Failed: 0, Warnings: 0 > > Changes in v6: > - Add "iscck" and "gck" to clock-names. > > Changes in v5: > - Modify the macro definition and the related code. > - Add clock-output-names. > > Changes in v4: > - Modify the isc clock code since the dt is changed. > - Remove the isc clock nodes. > > Changes in v3: > - Add pm runtime feature. > - Modify the isc clock code since the dt is changed. > - Remove the 'atmel,sensor-preferred'. > - Modify the isc clock node according to the Rob's remarks. > > Changes in v2: > - Add "depends on COMMON_CLK" and "VIDEO_V4L2_SUBDEV_API" > in Kconfig file. > - Correct typos and coding style according to Laurent's remarks > - Delete the loop while in 'isc_clk_enable' function. > - Replace 'hsync_active', 'vsync_active' and 'pclk_sample' > with 'pfe_cfg0' in struct isc_subdev_entity. > - Add the code to support VIDIOC_CREATE_BUFS in > 'isc_queue_setup' function. > - Invoke isc_config to configure register in > 'isc_start_streaming' function. > - Add the struct completion 'comp' to synchronize with > the frame end interrupt in 'isc_stop_streaming' function. > - Check the return value of the clk_prepare_enable > in 'isc_open' function. > - Set the default format in 'isc_open' function. > - Add an exit condition in the loop while in 'isc_config'. > - Delete the hardware setup operation in 'isc_set_format'. > - Refuse format modification during streaming > in 'isc_s_fmt_vid_cap' function. > - Invoke v4l2_subdev_alloc_pad_config to allocate and > initialize the pad config in 'isc_async_complete' function. > - Remove the '.owner = THIS_MODULE,' in atmel_isc_driver. > - Replace the module_platform_driver_probe() with > module_platform_driver(). > - Remove the unit address of the endpoint. > - Add the unit address to the clock node. > - Avoid using underscores in node names. > - Drop the "0x" in the unit address of the i2c node. > - Modify the description of 'atmel,sensor-preferred'. > - Add the description for the ISC internal clock. > > Songjun Wu (2): > [media] atmel-isc: add the Image Sensor Controller code > [media] atmel-isc: DT binding for Image Sensor Controller driver > > .../devicetree/bindings/media/atmel-isc.txt | 65 + > drivers/media/platform/Kconfig | 1 + > drivers/media/platform/Makefile | 2 + > drivers/media/platform/atmel/Kconfig | 9 + > drivers/media/platform/atmel/Makefile | 1 + > drivers/media/platform/atmel/atmel-isc-regs.h | 165 +++ > drivers/media/platform/atmel/atmel-isc.c | 1554 ++++++++++++++++++++ > 7 files changed, 1797 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt > create mode 100644 drivers/media/platform/atmel/Kconfig > create mode 100644 drivers/media/platform/atmel/Makefile > create mode 100644 drivers/media/platform/atmel/atmel-isc-regs.h > create mode 100644 drivers/media/platform/atmel/atmel-isc.c > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
