On 7/21/2016 16:41, Hans Verkuil wrote:
On 07/21/2016 10:14 AM, Songjun Wu wrote:
The Image Sensor Controller driver includes two parts.
1) Driver code to implement the ISC function.
2) Device tree binding documentation, it describes how
to add the ISC in device tree.
Test result with v4l-utils 1.10.1
Please compile from the v4l-utils repository. The version you used here is out-of-date.
I continually add new tests, so always compile the latest version from the repo.
OK, I will compile the latest version from the v4l-utils repository.
Thank you.
Regards,
Hans
Driver Info:
Driver name : atmel_isc
Card type : Atmel Image Sensor Controller
Bus info : platform:atmel_isc f0008000.isc
Driver version: 4.7.0
Capabilities : 0x84200001
Video Capture
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04200001
Video Capture
Streaming
Extended Pix Format
Compliance test for device /dev/video0 (not using libv4l2):
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second video open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Test input 0:
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
test VIDIOC_QUERYCTRL: OK (Not Supported)
test VIDIOC_G/S_CTRL: OK (Not Supported)
test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 0 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
Test input 0:
Stream using all formats:
test MMAP for Format BA81, Frame Size 640x480:
Stride 640, Field None: OK
test MMAP for Format YUYV, Frame Size 640x480:
Stride 1280, Field None: OK
Total: 44, Succeeded: 44, Failed: 0, Warnings: 0
Changes in v6:
- Add "iscck" and "gck" to clock-names.
Changes in v5:
- Modify the macro definition and the related code.
- Add clock-output-names.
Changes in v4:
- Modify the isc clock code since the dt is changed.
- Remove the isc clock nodes.
Changes in v3:
- Add pm runtime feature.
- Modify the isc clock code since the dt is changed.
- Remove the 'atmel,sensor-preferred'.
- Modify the isc clock node according to the Rob's remarks.
Changes in v2:
- Add "depends on COMMON_CLK" and "VIDEO_V4L2_SUBDEV_API"
in Kconfig file.
- Correct typos and coding style according to Laurent's remarks
- Delete the loop while in 'isc_clk_enable' function.
- Replace 'hsync_active', 'vsync_active' and 'pclk_sample'
with 'pfe_cfg0' in struct isc_subdev_entity.
- Add the code to support VIDIOC_CREATE_BUFS in
'isc_queue_setup' function.
- Invoke isc_config to configure register in
'isc_start_streaming' function.
- Add the struct completion 'comp' to synchronize with
the frame end interrupt in 'isc_stop_streaming' function.
- Check the return value of the clk_prepare_enable
in 'isc_open' function.
- Set the default format in 'isc_open' function.
- Add an exit condition in the loop while in 'isc_config'.
- Delete the hardware setup operation in 'isc_set_format'.
- Refuse format modification during streaming
in 'isc_s_fmt_vid_cap' function.
- Invoke v4l2_subdev_alloc_pad_config to allocate and
initialize the pad config in 'isc_async_complete' function.
- Remove the '.owner = THIS_MODULE,' in atmel_isc_driver.
- Replace the module_platform_driver_probe() with
module_platform_driver().
- Remove the unit address of the endpoint.
- Add the unit address to the clock node.
- Avoid using underscores in node names.
- Drop the "0x" in the unit address of the i2c node.
- Modify the description of 'atmel,sensor-preferred'.
- Add the description for the ISC internal clock.
Songjun Wu (2):
[media] atmel-isc: add the Image Sensor Controller code
[media] atmel-isc: DT binding for Image Sensor Controller driver
.../devicetree/bindings/media/atmel-isc.txt | 65 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 2 +
drivers/media/platform/atmel/Kconfig | 9 +
drivers/media/platform/atmel/Makefile | 1 +
drivers/media/platform/atmel/atmel-isc-regs.h | 165 +++
drivers/media/platform/atmel/atmel-isc.c | 1554 ++++++++++++++++++++
7 files changed, 1797 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/atmel-isc.txt
create mode 100644 drivers/media/platform/atmel/Kconfig
create mode 100644 drivers/media/platform/atmel/Makefile
create mode 100644 drivers/media/platform/atmel/atmel-isc-regs.h
create mode 100644 drivers/media/platform/atmel/atmel-isc.c
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
