Hermann,
On Sat, Aug 22, 2009 at 9:54 PM, hermann pitton<hermann-pitton@xxxxxxxx> wrote:
>
> Am Freitag, den 21.08.2009, 01:49 +0200 schrieb hermann pitton:
>> There is a great maintenance mess for those devices currently.
>>
>> All attempts, to get some further information out of those assumed to be
>> closest to the above manufactures, failed.
>>
>> Against any previous advice, newer products with an additional LNA,
>> which needs to be configured correctly, have been added and we can't
>> make any difference to previous products without LNA.
>>
>> Even more, the type of LNA configuration, either over tuner gain or some
>> on the analog IF demodulator, conflicts within this two devices itself.
>>
>> Since we never had a chance, to see such devices with all details
>> reported to our lists, but might still be able to make eventually a
>> difference, to get out of that mess, we should prefer to start exactly
>> where it started.
>
> Mauro, Douglas,
>
> just mark it as an RFC.
>
> Seems i lose any interest to follow up such further.
>
> Never allow any guys to go out into the wild, ending up with that I have
> to read their personal web blogs ..., out of lists.
>
> Cheers,
> Hermann
>
>
>> Signed-off-by: hermann pitton <hermann-pitton@xxxxxxxx>iff -r d0ec20a376fe linux/drivers/media/video/saa7134/saa7134-cards.c
>> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Thu Aug 20
>> 01:30:58 2009 +0000
>> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Aug 21
>> 01:28:37 2009 +0200
>> @@ -3242,7 +3242,7 @@
>> .radio_type = UNSET,
>> .tuner_addr = ADDR_UNSET,
>> .radio_addr = ADDR_UNSET,
>> - .tuner_config = 1,
>> + .tuner_config = 0,
>> .mpeg = SAA7134_MPEG_DVB,
>> .gpiomask = 0x000200000,
>> .inputs = {{
>> @@ -3346,7 +3346,7 @@
>> .radio_type = UNSET,
>> .tuner_addr = ADDR_UNSET,
>> .radio_addr = ADDR_UNSET,
>> - .tuner_config = 1,
>> + .tuner_config = 0,
>> .mpeg = SAA7134_MPEG_DVB,
>> .gpiomask = 0x0200100,
>> .inputs = {{
>> diff -r d0ec20a376fe linux/drivers/media/video/saa7134/saa7134-dvb.c
>> --- a/linux/drivers/media/video/saa7134/saa7134-dvb.c Thu Aug 20
>> 01:30:58 2009 +0000
>> +++ b/linux/drivers/media/video/saa7134/saa7134-dvb.c Fri Aug 21
>> 01:28:37 2009 +0200
>> @@ -1144,12 +1144,12 @@
>> break;
>> case SAA7134_BOARD_PINNACLE_PCTV_310i:
>> if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
>> - &tda827x_cfg_1) < 0)
>> + &tda827x_cfg_0) < 0)
>> goto dettach_frontend;
>> break;
>> case SAA7134_BOARD_HAUPPAUGE_HVR1110:
>> if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
>> - &tda827x_cfg_1) < 0)
>> + &tda827x_cfg_0) < 0)
>> goto dettach_frontend;
>> break;
>> case SAA7134_BOARD_HAUPPAUGE_HVR1150:
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
NACK.
Please do not change the LNA configuration for the HVR1110 -- I cannot
speak for the PCTV device, but I looked at the schematics for the
HVR1110 -- the LNA configuration should not be changed.
Regards,
Mike
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
