(switched to email. Please respond via emailed reply-to-all, not via the bugzilla web interface). Guys, this is reportedly a post-2.6.30 regression - I'll ask Rafael to add it to the regression tracking list. btw, does the flexcop driver have a regular maintainer? Or someone who wants to volunteer? MAINTAINERS is silent about it.. Thanks. On Sun, 5 Jul 2009 01:36:31 GMT bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: > http://bugzilla.kernel.org/show_bug.cgi?id=13709 > > Summary: b2c2-flexcop: no frontend driver found for this > B2C2/FlexCop adapter w/ kernel-2.6.31-rc2 > Product: v4l-dvb > Version: unspecified > Kernel Version: 2.6.31-rc1 > Platform: All > OS/Version: Linux > Tree: Mainline > Status: NEW > Severity: normal > Priority: P1 > Component: dvb-frontend > AssignedTo: v4l-dvb_dvb-frontend@xxxxxxxxxxxxxxxxxxxx > ReportedBy: bugzilla.kernel.org@xxxxxxxxxxx > Regression: Yes > > > Hi kernel people! > > Since kernel-2.6.31-rc1 my Technisat SkyStar2 DVB card isn't > working anymore, because no frontend driver is found. > The frontend 'ST STV0299 DVB-S' is compiled into the kernel > and _did_ work fine in pre-2.6.31 kernels. > > > [lspci] > ... > 05:02.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip > / Technisat SkyStar2 DVB card (rev 02) > [/lspci] > > [dmesg] > Working kernel-2.6.30.1: > ------------------------ > ... > b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded > successfully > b2c2_flexcop_pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > b2c2-flexcop: MAC address = 00:d0:d7:0f:30:58 > b2c2-flexcop: found 'ST STV0299 DVB-S' . > b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 3rd generation (HD5000)' > at the 'PCI' bus controlled by a 'FlexCopIIb' complete > ... > > Non-working kernel-2.6.31-rc: > ------------------------ > ... > b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded > successfully > b2c2_flexcop_pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > b2c2-flexcop: MAC address = 00:d0:d7:0f:30:58 > b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter > b2c2_flexcop_pci 0000:05:02.0: PCI INT A disabled > ... > [/dmesg] > > > I'll attach full dmesg+lspci. > Please feel free to contact me if you need more infos. > Thank you in advance ;) > > -- > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > ------- You are receiving this mail because: ------- > You are on the CC list for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
