On Mon, 20 Jul 2009, Andrew Morton wrote: > > (switched to email. Please respond via emailed reply-to-all, not via the > bugzilla web interface). > > > Guys, this is reportedly a post-2.6.30 regression - I'll ask Rafael to > add it to the regression tracking list. > > btw, does the flexcop driver have a regular maintainer? Or someone who > wants to volunteer? MAINTAINERS is silent about it.. I produced a patch that fixed this problem over a month ago, http://www.linuxtv.org/hg/~tap/v4l-dvb/rev/748c762fcf3e Maybe it should go into 2.6.31? > Thanks. > > On Sun, 5 Jul 2009 01:36:31 GMT > bugzilla-daemon@xxxxxxxxxxxxxxxxxxx wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=13709 > > > > Summary: b2c2-flexcop: no frontend driver found for this > > B2C2/FlexCop adapter w/ kernel-2.6.31-rc2 > > Product: v4l-dvb > > Version: unspecified > > Kernel Version: 2.6.31-rc1 > > Platform: All > > OS/Version: Linux > > Tree: Mainline > > Status: NEW > > Severity: normal > > Priority: P1 > > Component: dvb-frontend > > AssignedTo: v4l-dvb_dvb-frontend@xxxxxxxxxxxxxxxxxxxx > > ReportedBy: bugzilla.kernel.org@xxxxxxxxxxx > > Regression: Yes > > > > > > Hi kernel people! > > > > Since kernel-2.6.31-rc1 my Technisat SkyStar2 DVB card isn't > > working anymore, because no frontend driver is found. > > The frontend 'ST STV0299 DVB-S' is compiled into the kernel > > and _did_ work fine in pre-2.6.31 kernels. > > > > > > [lspci] > > ... > > 05:02.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip > > / Technisat SkyStar2 DVB card (rev 02) > > [/lspci] > > > > [dmesg] > > Working kernel-2.6.30.1: > > ------------------------ > > ... > > b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded > > successfully > > b2c2_flexcop_pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > > b2c2-flexcop: MAC address = 00:d0:d7:0f:30:58 > > b2c2-flexcop: found 'ST STV0299 DVB-S' . > > b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC 3rd generation (HD5000)' > > at the 'PCI' bus controlled by a 'FlexCopIIb' complete > > ... > > > > Non-working kernel-2.6.31-rc: > > ------------------------ > > ... > > b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded > > successfully > > b2c2_flexcop_pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > > b2c2-flexcop: MAC address = 00:d0:d7:0f:30:58 > > b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter > > b2c2_flexcop_pci 0000:05:02.0: PCI INT A disabled > > ... > > [/dmesg] > > > > > > I'll attach full dmesg+lspci. > > Please feel free to contact me if you need more infos. > > Thank you in advance ;) > > > > -- > > Configure bugmail: http://bugzilla.kernel.org/userprefs.cgi?tab=email > > ------- You are receiving this mail because: ------- > > You are on the CC list for the bug. > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
