On Tue, Jun 30, 2009 at 1:01 PM, George Czerw<gczerw@xxxxxxxxxxx> wrote: > > Using Mandriva 2009.1 with HVR connected directly to analog cable. > Using 32-bit kernel 2.6.29.3-desktop-1.mnb. > > TVtime and xawTV both open but display only snow. Channel scanning yields > nothing. > > If I boot into Vista and load MediaCenter, open liveTV and watch a channel. > Then close MediaCenter, exit Vista and boot into linux, TVtime and xawTV (if I > am lucky) might open-up and perfectly display the TV channel that I was last > viewing in Vista, but will not change channels to another station no matter > what I do. > > Please see the following outputs below. I would appreciate any > suggestions to resolve this. Not having hardware problems since WinVista's > media center works perfectly with this hardware. > > Thanks > George > > ************************* > > tvtime -v > Running tvtime 1.0.2. > > Reading configuration from /etc/tvtime/tvtime.xml > > Reading configuration from /home/george/.tvtime/tvtime.xml > > cpuinfo: CPU Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, family 6, > model 7, stepping 7. > > cpuinfo: CPU measured at 2333.352MHz. > > xcommon: Display :0.0, vendor The X.Org Foundation, vendor release 10601000 > > xfullscreen: Using XINERAMA for dual-head information. > xfullscreen: Pixels are square. > xfullscreen: Number of displays is 1. > xfullscreen: Head 0 at 0,0 with size 1440x900. > xcommon: Have XTest, will use it to ping the screensaver. > xcommon: Pixel aspect ratio 1:1. > xcommon: Pixel aspect ratio 1:1. > xcommon: Window manager is KWin and is EWMH compliant. > xcommon: Using EWMH state fullscreen property. > xcommon: Using EWMH state above property. > xcommon: Using EWMH state below property. > xcommon: Pixel aspect ratio 1:1. > xcommon: Displaying in a 768x576 window inside 768x576 space. > xvoutput: Using XVIDEO adaptor 280: NV17 Video Texture. > speedycode: Using MMXEXT optimized functions. > station: Reading stationlist from /home/george/.tvtime/stationlist.xml > videoinput: Using video4linux2 driver 'cx23885', card 'Hauppauge > WinTV-HVR1800' (bus PCIe:0000:03:00.0). > videoinput: Version is 1, capabilities 5010011. > videoinput: Maximum input width: 720 pixels. > tvtime: Sampling input at 720 pixels per scanline. > xcommon: Pixel aspect ratio 1:1. > xcommon: Displaying in a 768x576 window inside 768x576 space. > xcommon: Received a map, marking window as visible (62). > xcommon: Window fully obscured, marking window as hidden (62). > xcommon: Window made visible, marking window as visible (62). > tvtime: Cleaning up. > Thank you for using tvtime. > > ******************** > > > # lspci > 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM > Controller (rev > 02) > 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI > Express Root Port (rev > 02) > 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #4 (rev > 02) > 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #5 (rev > 02) > 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI > Controller #2 (rev > 02) > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio > Controller (rev > 02) > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 1 (rev 02) > 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 2 (rev 02) > 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 3 (rev 02) > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #3 (rev 02) > 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI > Controller #6 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI > Controller #1 (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 > ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller > (rev 02) > 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller > (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller > (rev 02) > 01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) 02:00.0 > Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI > Express Gigabit Ethernet controller (rev 02) 03:00.0 Multimedia video > controller: Conexant Systems, Inc. Device 8880 (rev 0f) > 04:00.0 Network controller: Atheros Communications Inc. AR928X Wireless > Network Adapter (PCI-Express) (rev 01) 05:00.0 VGA compatible controller: > nVidia Corporation Device 0644 (rev a1) > > ******************* > > # v4l-conf > v4l-conf: using X11 display :0.0 > dga: version 2.0 > WARNING: No DGA direct video mode for this display. mode: 1440x900, > depth=24, bpp=32, bpl=5760, base=unknown /dev/video0 [v4l2]: no overlay > support > > ******************* > selected DMESG output: > > nvidia: module license 'NVIDIA' taints kernel. > > nvidia 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > > nvidia 0000:05:00.0: setting latency timer to 64 > > > Linux video capture interface: v2.00 > > cx23885 driver version 0.0.1 loaded > > cx23885 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > > CORE cx23885[0]: subsystem: 0070:7801, board: Hauppauge WinTV-HVR1800 > [card=2,autodetected] > > tveeprom 0-0050: Hauppauge model 78521, rev C1E9, serial# 5342357 > > tveeprom 0-0050: MAC address is 00-0D-FE-51-84-95 > > tveeprom 0-0050: tuner model is Philips 18271_8295 (idx 149, type 54) > > tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88) > > tveeprom 0-0050: audio processor is CX23887 (idx 42) > > tveeprom 0-0050: decoder processor is CX23887 (idx 37) > > tveeprom 0-0050: has radio > > cx23885[0]: hauppauge eeprom: model=78521 > > cx25840' 2-0044: cx25 0-21 found @ 0x88 (cx23885[0]) > > cx23885[0]/0: registered device video0 [v4l2] > > cx25840' 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw > > cx25840' 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes) > > cx23885[0]: registered device video1 [mpeg] > > cx23885_dvb_register() allocating 1 frontend(s) > > cx23885[0]: cx23885 based dvb card > > MT2131: successfully identified at address 0x61 > > DVB: registering new adapter (cx23885[0]) > > DVB: registering adapter 0 frontend 0 (Samsung S5H1409 QAM/8VSB > Frontend)... > > cx23885_dev_checkrevision() Hardware revision = 0xb1 > > cx23885[0]/0: found at 0000:03:00.0, rev: 15, irq: 17, latency: 0, mmio: > 0xf9c00000 > > cx23885 0000:03:00.0: setting latency timer to 64 > > IRQ 17/cx23885[0]: IRQF_DISABLED is not guaranteed on shared IRQs > NVRM: loading NVIDIA UNIX x86 Kernel Module 180.51 Thu Apr 16 19:02:15 > PDT 2009 Make sure that the 'tuner' module and the 'cx25840' modules are both loaded. Make sure that you're using the lower spigot (if you have 2 spigots) or the middle spigot (if you have 3 spigots) BTW, your email is off-topic for the linux-dvb mailing list. I added cc to the linux-media mailing list, which is more appropriate for your analog television problem. Regards, Mike -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
