OK after adding 'options saa7134 card=156' to /etc/modprobe.d/modprobe.conf it loads correctly, thanks Brad. dmesg: [ 8.438243] Linux video capture interface: v2.00 [ 8.606434] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.606440] nvidia 0000:01:00.0: setting latency timer to 64 [ 8.607114] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.14 Wed May 27 01:23:47 PDT 2009 [ 8.626542] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 8.659879] iTCO_vendor_support: vendor-support=0 [ 8.666626] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 8.666736] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0460) [ 8.666811] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.742132] saa7130/34: v4l2 driver version 0.2.15 loaded [ 8.742181] saa7134 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8.742186] saa7130[0]: found at 0000:05:01.0, rev: 1, irq: 19, latency: 32, mmio: 0xfb002000 [ 8.742191] saa7130[0]: subsystem: 107d:6655, board: Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [card=156,insmod option] [ 8.742214] saa7130[0]: board init: gpio is 22000 [ 8.852862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 8.852908] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.916022] saa7130[0]: i2c eeprom 00: 7d 10 55 66 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 8.916031] saa7130[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 8.916039] saa7130[0]: i2c eeprom 20: 01 40 01 01 01 ff 01 03 08 ff 00 8a ff ff ff ff [ 8.916046] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916054] saa7130[0]: i2c eeprom 40: ff 35 00 c0 00 10 03 02 ff 04 ff ff ff ff ff ff [ 8.916062] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916069] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916077] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916085] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916092] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916100] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916108] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916115] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916123] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916131] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916138] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 8.916148] tveeprom 0-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. [ 8.916150] saa7130[0]: warning: unknown hauppauge model #0 [ 8.916151] saa7130[0]: hauppauge eeprom: model=0 [ 8.980528] Chip ID is not zero. It is not a TEA5767 [ 8.980592] tuner 0-0060: chip found @ 0xc0 (saa7130[0]) [ 9.016010] tda8290: no gate control were provided! [ 9.016080] tuner 0-0060: Tuner has no way to set tv freq [ 9.016086] tuner 0-0060: Tuner has no way to set tv freq [ 9.016171] saa7130[0]: registered device video0 [v4l2] [ 9.016215] saa7130[0]: registered device vbi0 [ 9.016251] saa7130[0]: registered device radio0 [ 9.016387] rt2400pci 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 9.024385] phy0: Selected rate control algorithm 'pid' [ 9.028685] saa7134 ALSA driver for DMA sound loaded [ 9.028688] saa7130[0]/alsa: Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid doesn't support digital audio [ 9.060205] dvb_init() allocating 1 frontend [ 9.093967] Registered led device: rt2400pci-phy0:radio [ 9.093980] Registered led device: rt2400pci-phy0:quality [ 9.150392] lp0: using parport0 (interrupt-driven). [ 9.174892] tda18271 0-0060: creating new instance [ 9.184029] TDA18271HD/C1 detected @ 0-0060 [ 9.211513] Adding 6024332k swap on /dev/sda5. Priority:-1 extents:1 across:6024332k [ 9.588014] DVB: registering new adapter (saa7130[0]) [ 9.588018] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... [ 9.739258] EXT4 FS on sda1, internal journal on sda1:8 [ 9.916017] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 9.916022] saa7134 0000:05:01.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 10.020209] tda10048_firmware_upload: Upload failed. (file not found?) [ 10.466227] kjournald starting. Commit interval 5 seconds [ 10.466428] EXT3 FS on sda3, internal journal [ 10.466432] EXT3-fs: mounted filesystem with ordered data mode. [ 10.616663] type=1505 audit(1245387419.676:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2116 [ 10.647644] type=1505 audit(1245387419.704:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2120 [ 10.647715] type=1505 audit(1245387419.704:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2120 [ 10.647747] type=1505 audit(1245387419.704:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2120 [ 10.647775] type=1505 audit(1245387419.704:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2120 [ 10.733586] type=1505 audit(1245387419.792:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2125 [ 10.733704] type=1505 audit(1245387419.792:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2125 [ 10.753465] type=1505 audit(1245387419.812:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2129 [ 13.133547] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 13.133550] vboxdrv: Successfully done. [ 13.133551] vboxdrv: Found 2 processor cores. [ 13.134200] VBoxDrv: dbg - g_abExecMemory=ffffffffa0d4eaa0 [ 13.134216] vboxdrv: fAsync=0 offMin=0x1c7 offMax=0x18aa [ 13.134252] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 13.134254] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 13.338753] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0eed940 [ 18.940672] r8169: eth0: link down [ 18.940962] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.968910] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.988344] wlan0: authenticate with AP 00:1d:92:15:2a:f1 [ 31.008515] wlan0: authenticated [ 31.008518] wlan0: associate with AP 00:1d:92:15:2a:f1 [ 31.010596] wlan0: RX AssocResp from 00:1d:92:15:2a:f1 (capab=0x11 status=0 aid=2) [ 31.010598] wlan0: associated [ 31.011417] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.560010] wlan0: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
