Hi, Am Dienstag, den 16.06.2009, 11:33 -0400 schrieb Michael Krufky: > On Sun, Jun 7, 2009 at 6:39 PM, hermann pitton<hermann-pitton@xxxxxxxx> wrote: > > > > Am Montag, den 08.06.2009, 07:59 +1000 schrieb paul10@xxxxxxxxxxxx: > >> That is fantastic news. Not only will it be coming soon, but I don't have > >> to do it myself!! > >> > >> How will we know when the test repository is created - will it be > >> announced on this list? > >> > >> Thanks, > >> > >> Paul > >> > >> > >> > Henry Wu did send modified saa7134 files with support for this card on > >> > Tuesday off list. > >> > >> > Mike replied, that he will set up a test repository as soon he gets some > >> > time for doing so. > > > > Paul, > > > > give Mike some time for it. > > > > There are much more variables in question, that can be different on > > devices now seen in the wild for the first time and a proper framework > > must be employed. > > > > If you can't wait, ask Mike do send you the files, seems they are recent > > enough for current v4l-dvb, but better is to wait and start with some > > unified testing base. > > > > Cheers, > > Hermann > > > Hello all, > > Apologies for the delay -- I've been extremely busy over the past few > weeks, but that's nothing new :-P > > Anyhow, I pushed up some code almost 2 weeks ago that should cover the > DTV1000S in all variations. Thanks to Terry Wu for the baseband video > gpio setup. > > I haven't had time to ask anybody to test this yet, so I'd appreciate > it if you can provide some general feedback. > > This change only adds support for the new card, so I am not interested > in anybody's experience with other boards -- this ONLY relates to the > DTV1000S. > > Terry's patches copy the device specific setup from the Hauppauge > HVR1110 -- this is actually dangerous, as the HVR1110 GPIO / LNA setup > could cause problems when used on other boards. > > Terry's patches also support a version of the board with a TDA18271c2 > -- I don't know if such a board actually exists, but the way that > Terry did it doesn't allow for supporting both variations in a single > kernel. If the c2 version of the board actually exists, the code that > I pushed will work on board boards. > > I'd like to see dmesg output while using my tree -- please include > full device initialization, starting with the line, "Linux video > capture interface: v2.00" up till the end. > > I am especially interested to see whether or not the TDA8295 driver > attaches successfully -- I have a feeling that there actually is no > TDA8295 on that board, but I don't know for sure, offhand. > > Please test the following tree: > > http://kernellabs.com/hg/~mkrufky/dtv1000s > > - saa7134: add initial DVB-T support for the Leadtek DTV1000S > - saa7134: add support for baseband video capture on Leadtek DTV1000S > > Documentation/video4linux/CARDLIST.saa7134 | 1 > drivers/media/video/saa7134/saa7134-cards.c | 22 +++++ > drivers/media/video/saa7134/saa7134-dvb.c | 39 ++++++++++ > drivers/media/video/saa7134/saa7134.h | 1 > 4 files changed, 63 insertions(+) > > Cheers, > > Mike Krufky guess Sander with that Zolid hybrid and such hardware with a saa7131e should give it a try for DVB-T too with card=169 on your testing repo. If he still has it ;) Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
