Hi,
sorry for the nusable output!
I found the time consuming funktion:
bttv_init_card2(btv);
This takes about 4 min. today.
my new testcode:
/* needs to be done before i2c is registered */
printk("linke 2:bttv_init_card1(btv);\n");
bttv_init_card1(btv);
/* register i2c + gpio */
printk("line 3: init_bttv_i2c(btv);\n");
init_bttv_i2c(btv);
/* some card-specific stuff (needs working i2c) */
printk("line4: some card-specific stuff needs working i2c \n");
bttv_init_card2(btv);
printk("irq init\n");
init_irqreg(btv);
dmesg output:
[ 2282.430209] bttv: driver version 0.9.18 loaded
[ 2282.430216] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 2282.430313] bttv: Bt8xx card found (0).
[ 2282.430334] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio
: 0xf7800000
[ 2282.430777] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insm
od option]
[ 2282.430839] bttv_gpio_tracking(bt
[ 2282.430843] bttv0: gpio: en=00000000, out=00000000 in=003ff502 [init]
[ 2282.430845] linke 2:bttv_init_card1(btv);
[ 2282.430859] line 3: init_bttv_i2c(btv);
[ 2282.430917] line4: some card-specific stuff needs working i2c
[ 2282.430922] bttv0: tuner type=24
Ok here is the 4 min dely and after that the following linkes were printed out:
[ 2416.836017] bttv0: audio absent, no audio device found!
[ 2416.836024] irq init
[ 2416.840551] bttv0: registered device video1
[ 2416.840684] bttv0: registered device vbi0
[ 2416.840716] bttv0: registered device radio0
[ 2416.840736] bttv0: PLL: 28636363 => 35468950 .<6>bttv0: PLL: 28636363 => 3546
8950 . ok
[ 2416.856221] input: bttv IR (card=34) as /devices/pci0000:00/0000:00:0b.0/inpu
t/input10
[ 2416.864069] ok
Hope that helps!
Regards
Halim
--
Halim Sahin
E-Mail:
halim.sahin (at) t-online.de
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
