Hi, In the past I could use this card by typing modprobe bttv card=34 tuner=24 gbuffers=16 Giving this command with current drivers has some problems: 1. it takes several minutes to load bttv module. 2. capturing doesn't work any more (dropped frames etc). Tested with current v4l-dvb from hg, ubuntu 9.04, debian lenny. I have a bt878 based card from leadtek. Here is my output after loading the driver: [ 3013.735459] bttv: driver version 0.9.17 loaded [ 3013.735470] bttv: using 32 buffers with 16k (4 pages) each for capture [ 3013.735542] bttv: Bt8xx card found (0). [ 3013.735562] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio : 0xf7800000 [ 3013.737762] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insm od option] [ 3013.737825] bttv0: gpio: en=00000000, out=00000000 in=003ff502 [init] [ 3148.136017] bttv0: tuner type=24 [ 3148.136029] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 3154.536019] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 3160.936018] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 3167.351398] bttv0: registered device video0 [ 3167.351434] bttv0: registered device vbi0 [ 3167.351463] bttv0: registered device radio0 [ 3167.351485] bttv0: PLL: 28636363 => 35468950 . ok [ 3167.364182] input: bttv IR (card=34) as /class/input/input6 Please help! Regards Halim -- Halim Sahin E-Mail: halim.sahin (at) t-online.de -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
