On Tue, Mar 31, 2009 at 1:07 AM, Antti Palosaari <crope@xxxxxx> wrote: > Olivier MENUEL wrote: >> >> Here are my tests : >> >> http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/ : >> >> I found why kaffeine was not working : I needed to check all offset >> checkboxes when scanning. >> Like Thomas, I get these messages in /var/log/messages when scanning or >> changing channel : af9015_pid_filter_ctrl: onoff:0 (with kaffeine, scan or >> vlc) > > That's normal behaviour. dvb-usb-framework calls .pid_filter_ctrl(0) > callback to ensure pid-filter is disabled. Those logs will not seen normally > when debug-logs are disabled. > >> I found a weird thing though with kaffeine (that may be a wrong setting >> somewhere in kaffeine though, it's the first time I use a DVB device on >> linux). If I stop kaffeine and restart it I can't access the channels I just >> scanned anymore : I get an error message : >> Tuning to: NRJ12 / autocount: 0 >> Using DVB device 0:0 "Afatech AF9013 DVB-T" >> tuning DVB-T to 498167000 Hz >> inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4 >> ..... >> Not able to lock to the signal on the given frequency >> Frontend closed >> Tuning delay: 1062 ms >> >> I need to switch channels several times and eventually it works : I can >> now change channels without any problems ! >> But if I quit and restart kaffeine, I get the same problem again >> No problem with VLC. > > hmm, no idea. Sometimes I have also seen rather similar problems when > switching channels but restarting Totem solves problem. > > I did full band w_scan and it founds all muxes I can receive (4xDVB-T + > 1xDVB-H). I haven't tested Kaffeine. > >> Except that everything seems to work perfectly fine ! >> I'm not sure exactly what you want me to test though. >> >> >> GPI01 : >> >> Seems quite similar to previous one. Everything seems fine too (except the >> weird kaffeine issue). >> In the logs I get the same message : af9015_pid_filter_ctrl: onoff:0 >> >> >> >> Finally, I tested GPI00 : >> >> Working fine too, seems exactly like previous ones. >> >> I hope I installed these correctly and did not mess up between the >> different drivers. >> Let me know if something seems weird or if you want me to test something >> else. >> >> I'm really glad it finally works ;) Thanks a lot. > > For me it seems like tuner is not connected to GPIO pin at all. I will wait > someone else, Thomas?, will test. Testing this (af9015_aver_a850_2) tree is > enough if it works: > http://linuxtv.org/hg/~anttip/af9015_aver_a850_2/ I guess I'm a bit late, is there still anything to test? I tried http://linuxtv.org/hg/~anttip/af9015 (2f6cf8db5325), using scan, tzap and mplayer. Except for low signal quality (bad location + lack of proper antenna), everything seemed to work fine. best regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
