On Thu, Feb 19, 2009 at 8:12 PM, Manu <eallaud@xxxxxxxxx> wrote: > Le 19.02.2009 10:40:42, Faruk A a écrit : >> On Thu, Feb 19, 2009 at 11:55 AM, Manu <eallaud@xxxxxxxxx> wrote: >> > Le 19.02.2009 04:51:09, Jean-Francois Moine a écrit : >> >> On Wed, 18 Feb 2009 19:30:37 -0400 >> >> Manu <eallaud@xxxxxxxxx> wrote: >> >> >> >> > Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit : >> >> > > Yes. I use it to look at FTA channels on AB3 5°W: >> >> > > >> >> > > - France 24 (12674.00 H - DVB-S2 - QPSK) is good. >> >> > > >> >> > > - I can also get the transponder 11636.00 V (DVB Newtec - >> QPSK), >> >> but >> >> > > not >> >> > > the transponder 11139.00 V (DVB Newtec - 8PSK turbo) >> >> > > >> >> > > - For some time, there were clear channels (M6 and W9) in the >> >> > > transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine. >> >> > >> >> > Just to make things clear, can you prodvide symbol rate and FEC >> for >> >> > all these transponders. >> >> >> >> I don't understand the question! >> >> >> >> I think the symbol rate is mandatory, but the FEC may found >> >> automatically. For example, I use vlc for the 2 different >> >> transponders: >> >> >> >> #EXTINF:0,orange >> >> #EXTVLCOPT:dvb-frequency=11512000 >> >> #EXTVLCOPT:dvb-srate=29947000 >> >> #EXTVLCOPT:dvb-voltage=13 >> >> dvb:// >> >> #EXTINF:0,france >> >> #EXTVLCOPT:dvb-frequency=11590000 >> >> #EXTVLCOPT:dvb-srate=20000000 >> >> #EXTVLCOPT:dvb-voltage=13 >> >> dvb:// >> >> >> >> The first transponder is FEC 7/8, and the second 2/3. >> >> >> >> For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + >> >> dvbstream. >> > >> > OK great thx, that's what I was asking for! Indeed I have some >> troubles >> > locking on S2 transponders which all have 30 MS/s rate. I see that >> > yours are lower, well with one very close to that. >> > Bye >> > Emmanuel >> >> Hi Manu! >> >> I use to own this card until it broke and replaced with TeVii S650. >> It used to lock just fine on this Transponders. Although i can't >> receive from this satellite >> anymore my dish has been realigned to 16E instead. >> >> Thor 1W >> 12015 H 30000-3/4 >> 12130 H 30000-3/4 >> >> Faruk >> > > Thx, can you tell me with which driver (repo and date if possible). > Thx > Bye > Emmanuel > With multiproto repo: http://jusst.de/hg/multiproto and the pctv452e.patch since that card was not support in any repo. I'm not 100% sure but i think i tried it with S2API too, the last time i tried this card with S2API, Dominik's (creator of the driver) patch was more stable than the one in s2-liplianin which did'nt include all parts of the Dominik's patch i think because the patch changes stb0899 code. Here is the Dominik's original patch http://hem.passagen.se/faruks/3650/my_s2api_pctv452e.txt the patch changes couple of files compare it with the one on http://mercurial.intuxication.org/hg/s2-liplianin or http://linuxtv.org/hg/v4l-dvb Faruk -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
