Le 19.02.2009 04:51:09, Jean-Francois Moine a écrit : > On Wed, 18 Feb 2009 19:30:37 -0400 > Manu <eallaud@xxxxxxxxx> wrote: > > > Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit : > > > Yes. I use it to look at FTA channels on AB3 5°W: > > > > > > - France 24 (12674.00 H - DVB-S2 - QPSK) is good. > > > > > > - I can also get the transponder 11636.00 V (DVB Newtec - QPSK), > but > > > not > > > the transponder 11139.00 V (DVB Newtec - 8PSK turbo) > > > > > > - For some time, there were clear channels (M6 and W9) in the > > > transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine. > > > > Just to make things clear, can you prodvide symbol rate and FEC for > > all these transponders. > > I don't understand the question! > > I think the symbol rate is mandatory, but the FEC may found > automatically. For example, I use vlc for the 2 different > transponders: > > #EXTINF:0,orange > #EXTVLCOPT:dvb-frequency=11512000 > #EXTVLCOPT:dvb-srate=29947000 > #EXTVLCOPT:dvb-voltage=13 > dvb:// > #EXTINF:0,france > #EXTVLCOPT:dvb-frequency=11590000 > #EXTVLCOPT:dvb-srate=20000000 > #EXTVLCOPT:dvb-voltage=13 > dvb:// > > The first transponder is FEC 7/8, and the second 2/3. > > For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + > dvbstream. OK great thx, that's what I was asking for! Indeed I have some troubles locking on S2 transponders which all have 30 MS/s rate. I see that yours are lower, well with one very close to that. Bye Emmanuel -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
