On Thu, Feb 19, 2009 at 11:55 AM, Manu <eallaud@xxxxxxxxx> wrote: > Le 19.02.2009 04:51:09, Jean-Francois Moine a écrit : >> On Wed, 18 Feb 2009 19:30:37 -0400 >> Manu <eallaud@xxxxxxxxx> wrote: >> >> > Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit : >> > > Yes. I use it to look at FTA channels on AB3 5°W: >> > > >> > > - France 24 (12674.00 H - DVB-S2 - QPSK) is good. >> > > >> > > - I can also get the transponder 11636.00 V (DVB Newtec - QPSK), >> but >> > > not >> > > the transponder 11139.00 V (DVB Newtec - 8PSK turbo) >> > > >> > > - For some time, there were clear channels (M6 and W9) in the >> > > transponder 11471.00 V (DVB-S2 - 8PSK). Both were fine. >> > >> > Just to make things clear, can you prodvide symbol rate and FEC for >> > all these transponders. >> >> I don't understand the question! >> >> I think the symbol rate is mandatory, but the FEC may found >> automatically. For example, I use vlc for the 2 different >> transponders: >> >> #EXTINF:0,orange >> #EXTVLCOPT:dvb-frequency=11512000 >> #EXTVLCOPT:dvb-srate=29947000 >> #EXTVLCOPT:dvb-voltage=13 >> dvb:// >> #EXTINF:0,france >> #EXTVLCOPT:dvb-frequency=11590000 >> #EXTVLCOPT:dvb-srate=20000000 >> #EXTVLCOPT:dvb-voltage=13 >> dvb:// >> >> The first transponder is FEC 7/8, and the second 2/3. >> >> For the other transponders (DVB-S2 / 8PSK), if use szap-s2 + >> dvbstream. > > OK great thx, that's what I was asking for! Indeed I have some troubles > locking on S2 transponders which all have 30 MS/s rate. I see that > yours are lower, well with one very close to that. > Bye > Emmanuel Hi Manu! I use to own this card until it broke and replaced with TeVii S650. It used to lock just fine on this Transponders. Although i can't receive from this satellite anymore my dish has been realigned to 16E instead. Thor 1W 12015 H 30000-3/4 12130 H 30000-3/4 Faruk -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
