On Fri, Feb 6, 2009 at 3:22 PM, Manu <eallaud@xxxxxxxxx> wrote: >> Can you please send me a complete trace with the stb6100 and stb0899 >> modules loaded with verbose=5 for the 30MSPS transponder what you >> are trying ? One simple szap would be enough (no scan please) based >> on the http://jusst.de/hg/v4l-dvb tree. >> >> Before you start testing, start clean from a cold boot after a >> powerdown. This makes it a bit more easier identify things. > > OK I did just that with latest multiproto on a 11495 MHz trnaposnder, > DVB-S2, 30MS/s, FEC 5/6 which works using the provider's STB . I put > the log in attachement. You will observe a lock is acquired really > briefly and then nothing. Obtained using: > szap2 -t 2 > I hope this can give you some data. Let me know if you need more info > (like putting some more printksin the source). > Bye > Manu > Sorry for the late reply, but the new list confuses the hell out of me and I missed this message, somehow... Attached is a log file with the results of dvb-apps/szap on a 30000 3/4 channel using a http://jusst.de/hg/v4l-dvb clean compile and cold boot as recommended. Also loaded stb6100 and stb0899 with verbose=5 Command line used and result: root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c /video/channels.conf -n 7 reading channels from file '/video/channels.conf' zapping to 7 '[006b]': sat 0, frequency = 12012 MHz H, symbolrate 30000000, vpid = 0x1031, apid = 0x1032 sid = 0x1004 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe | [...] status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe | status 00 | signal 7fb2 | snr 0000 | ber 00000000 | unc fffffffe | After that szapping to that problematic channel, I tried a DVB-S channel, which locks without problems. root@vdr:/usr/local/src/v4l-dvb_multi/dvb-apps/util/szap# ./szap -c /video/channels.conf -H -n 33 reading channels from file '/video/channels.conf' zapping to 33 'FOX': sat 0, frequency = 11617 MHz V, symbolrate 27500000, vpid = 0x1b30, apid = 0x1b31 sid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal 49% | snr 0% | ber 0 | unc -2 | status 1e | signal 0% | snr 0% | ber 0 | unc -2 | FE_HAS_LOCK Going to test your the same multiproto tree _with_ both patches you mentioned early on this thread. BTW, I can see all those channels just fine using a DM800 and the provider original decoder with my subscription card. I'm positive that dish/lnb/connections aren't the problem. Thanks for taking the time to address this particular issue. Chris
Attachment:
v4l-dvb-multiproto_s2-3200_no_patch_test_log.txt.tar.bz2
Description: BZip2 compressed data
