Horay my TeVii DVB-S S420 is now working,
only thing now is to work out why it wont load on boot before my DVB-T card
On 16/01/2009 3:19 PM, Aaron Theodore wrote:
I tried:
make rmmod
make rminstall
Although there were still some drivers left over from "tevii_linuxdriver_0815"
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko
/lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko
so i just removed manually and rebooted.
Same issue occurred on reboot.
So i thought to try manually unloading and reloading the module
barry:~# rmmod cx8802
barry:~# modprobe cx8802
kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
kernel: cx88[0]/2: cx2388x 8802 Driver Manager
kernel: ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd9000000
kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73]
kernel: cx88[0]/2: cx2388x based DVB/ATSC card
kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
kernel: DVB: registering new adapter (cx88[0])
kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)...
This time it makes the devices in /dev/dvb/
Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!)
Will report back later
Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules
Aaron
----- "Mauro Carvalho Chehab" <mchehab@xxxxxxxxxxxxx> wrote:
On Fri, 16 Jan 2009 06:56:05 +1100
Aaron Theodore <aaron@xxxxxxxxx> wrote:
Mauro,
Thanks for the speedy patch!
You should thanks to Andy. He is the author of this patch ;)
My system can at least boot now, but has issues loading the
frontend.
DVB: Unable to find symbol stv0299_attach()
DVB: Unable to find symbol stv0288_attach()
It seems that you didn't compile those two frontends.
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
