I tried: make rmmod make rminstall Although there were still some drivers left over from "tevii_linuxdriver_0815" /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko so i just removed manually and rebooted. Same issue occurred on reboot. So i thought to try manually unloading and reloading the module barry:~# rmmod cx8802 barry:~# modprobe cx8802 kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded kernel: cx88[0]/2: cx2388x 8802 Driver Manager kernel: ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd9000000 kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded kernel: cx88/2: registering cx8802 driver, type: dvb access: shared kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73] kernel: cx88[0]/2: cx2388x based DVB/ATSC card kernel: cx8802_alloc_frontends() allocating 1 frontend(s) kernel: DVB: registering new adapter (cx88[0]) kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)... This time it makes the devices in /dev/dvb/ Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!) Will report back later Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules Aaron ----- "Mauro Carvalho Chehab" <mchehab@xxxxxxxxxxxxx> wrote: > On Fri, 16 Jan 2009 06:56:05 +1100 > Aaron Theodore <aaron@xxxxxxxxx> wrote: > > > Mauro, > > > > Thanks for the speedy patch! > > You should thanks to Andy. He is the author of this patch ;) > > > My system can at least boot now, but has issues loading the > frontend. > > DVB: Unable to find symbol stv0299_attach() > > DVB: Unable to find symbol stv0288_attach() > > It seems that you didn't compile those two frontends. > > Cheers, > Mauro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html