Hi Brad,
I'm glad that showed the problem. Yes, the only difference between the two is just the boot_delay argument.
Thanks,
J Silverman
--- On Sat, 8/23/08, Brad Boyer <flar@xxxxxxxxxxxxx> wrote:
From: Brad Boyer <flar@xxxxxxxxxxxxx>
Subject: Re: Known working 2.6 kernel config for m68k Mac
To: "J Silverman" <g1powermac@xxxxxxxxx>
Cc: "Finn Thain" <fthain@xxxxxxxxxxxxxxxxxxx>, linux-m68k@xxxxxxxxxxxxxxx
Date: Saturday, August 23, 2008, 2:06 PM
On Fri, Aug 22, 2008 at 10:21:26AM -0700, J Silverman wrote:
I just want to let you guys know that I was able to
get the serial
port stuff setup and was able to capture the last
kernel message
before the Powerbook would shutdown on start up
(thanks again Finn
for the serial cable tip!) Here it is:
This definitely shows what happened. Thank you.
[snip]
pmu intr 02 02
pmu_init: timed out acking intrs
Warning: no ADB interface detected
This appears to be the fundamental problem. For some
reason, this
time it can't initialize the PMU properly. I suspect
that if we
start to initialize the PMU but don't finish, it gets
unhappy.
The successful boot is only different by the arguments, not
a
different kernel? It looks like the timing must change such
that
the messages to the PMU get out of sync. These are the hard
ones
to debug because adding extra code changes the behavior.
Brad Boyer
flar@xxxxxxxxxxxxx
--
To unsubscribe from this list: send the line
"unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-m68k" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
