The driver has been extended to optionally get its operational
mode, regulator init data and LED naming from the devicetree.
Tree: next-20191118
Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Sven Van Asbroeck <TheSven73@xxxxxxxxx>
---
.../devicetree/bindings/mfd/tps6105x.txt | 47 ++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/tps6105x.txt b/Documentation/devicetree/bindings/mfd/tps6105x.txt
index 93602c7a19c8..d15763740a3f 100644
--- a/Documentation/devicetree/bindings/mfd/tps6105x.txt
+++ b/Documentation/devicetree/bindings/mfd/tps6105x.txt
@@ -7,11 +7,56 @@ Required properties:
- compatible: "ti,tps61050" or "ti,tps61052"
- reg: Specifies the I2C slave address
-Example:
+Optional sub-node:
+
+This subnode selects the chip's operational mode.
+There can be at most one single available subnode.
+
+- regulator: presence of this sub-node puts the chip in regulator mode.
+ see Documentation/devicetree/bindings/regulator/regulator.txt
+
+- led: presence of this sub-node puts the chip in led mode.
+ Optional properties:
+ - function : see ../leds/common.txt
+ - color : see ../leds/common.txt
+ - label : see ../leds/common.txt
+ (deprecated)
+
+Example (GPIO operation only):
+
+i2c0 {
+ tps61052@33 {
+ compatible = "ti,tps61052";
+ reg = <0x33>;
+ };
+};
+
+Example (GPIO + regulator operation):
i2c0 {
tps61052@33 {
compatible = "ti,tps61052";
reg = <0x33>;
+
+ regulator {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ };
+};
+
+Example (GPIO + led operation):
+
+#include <dt-bindings/leds/common.h>
+
+i2c0 {
+ tps61052@33 {
+ compatible = "ti,tps61052";
+ reg = <0x33>;
+
+ led {
+ color = <LED_COLOR_ID_WHITE>;
+ };
};
};
--
2.17.1
