On Tue, Nov 19, 2019 at 01:46:22PM -0600, Rob Herring wrote:
> Convert the common LEDs properties bindings to a schema. As trigger source
> providers are different nodes, we need to split trigger source properties
> to a separate file.
>
> Bindings for LED controllers can reference the common schema for the LED
> child nodes:
>
> patternProperties:
> "^led@[0-4]":
> type: object
> allOf:
> - $ref: common.yaml#
>
> Cc: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
> Cc: Pavel Machek <pavel@xxxxxx>
> Cc: Dan Murphy <dmurphy@xxxxxx>
> Cc: linux-leds@xxxxxxxxxxxxxxx
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> .../devicetree/bindings/leds/common.txt | 174 +------------
> .../devicetree/bindings/leds/common.yaml | 228 ++++++++++++++++++
> .../bindings/leds/trigger-source.yaml | 24 ++
> 3 files changed, 253 insertions(+), 173 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/leds/common.yaml
> create mode 100644 Documentation/devicetree/bindings/leds/trigger-source.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> index 9fa6f9795d50..26d770ef3601 100644
> --- a/Documentation/devicetree/bindings/leds/common.txt
> +++ b/Documentation/devicetree/bindings/leds/common.txt
> @@ -1,173 +1 @@
> -* Common leds properties.
> -
> -LED and flash LED devices provide the same basic functionality as current
> -regulators, but extended with LED and flash LED specific features like
> -blinking patterns, flash timeout, flash faults and external flash strobe mode.
> -
> -Many LED devices expose more than one current output that can be connected
> -to one or more discrete LED component. Since the arrangement of connections
> -can influence the way of the LED device initialization, the LED components
> -have to be tightly coupled with the LED device binding. They are represented
> -by child nodes of the parent LED device binding.
> -
> -
> -Optional properties for child nodes:
> -- led-sources : List of device current outputs the LED is connected to. The
> - outputs are identified by the numbers that must be defined
> - in the LED device binding documentation.
> -
> -- function: LED functon. Use one of the LED_FUNCTION_* prefixed definitions
> - from the header include/dt-bindings/leds/common.h.
> - If there is no matching LED_FUNCTION available, add a new one.
> -
> -- color : Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions
> - from the header include/dt-bindings/leds/common.h.
> - If there is no matching LED_COLOR_ID available, add a new one.
> -
> -- function-enumerator: Integer to be used when more than one instance
> - of the same function is needed, differing only with
> - an ordinal number.
> -
> -- label : The label for this LED. If omitted, the label is taken from the node
> - name (excluding the unit address). It has to uniquely identify
> - a device, i.e. no other LED class device can be assigned the same
> - label. This property is deprecated - use 'function' and 'color'
> - properties instead. function-enumerator has no effect when this
> - property is present.
> -
> -- default-state : The initial state of the LED. Valid values are "on", "off",
> - and "keep". If the LED is already on or off and the default-state property is
> - set the to same value, then no glitch should be produced where the LED
> - momentarily turns off (or on). The "keep" setting will keep the LED at
> - whatever its current state is, without producing a glitch. The default is
> - off if this property is not present.
> -
> -- linux,default-trigger : This parameter, if present, is a
> - string defining the trigger assigned to the LED. Current triggers are:
> - "backlight" - LED will act as a back-light, controlled by the framebuffer
> - system
> - "default-on" - LED will turn on (but for leds-gpio see "default-state"
> - property in Documentation/devicetree/bindings/leds/leds-gpio.txt)
> - "heartbeat" - LED "double" flashes at a load average based rate
> - "disk-activity" - LED indicates disk activity
> - "ide-disk" - LED indicates IDE disk activity (deprecated),
> - in new implementations use "disk-activity"
> - "timer" - LED flashes at a fixed, configurable rate
> - "pattern" - LED alters the brightness for the specified duration with one
> - software timer (requires "led-pattern" property)
> -
> -- led-pattern : Array of integers with default pattern for certain triggers.
> - Each trigger may parse this property differently:
> - - one-shot : two numbers specifying delay on and delay off (in ms),
> - - timer : two numbers specifying delay on and delay off (in ms),
> - - pattern : the pattern is given by a series of tuples, of
> - brightness and duration (in ms). The exact format is
> - described in:
> - Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
> -
> -
> -- led-max-microamp : Maximum LED supply current in microamperes. This property
> - can be made mandatory for the board configurations
> - introducing a risk of hardware damage in case an excessive
> - current is set.
> - For flash LED controllers with configurable current this
> - property is mandatory for the LEDs in the non-flash modes
> - (e.g. torch or indicator).
> -
> -- panic-indicator : This property specifies that the LED should be used,
> - if at all possible, as a panic indicator.
> -
> -- trigger-sources : List of devices which should be used as a source triggering
> - this LED activity. Some LEDs can be related to a specific
> - device and should somehow indicate its state. E.g. USB 2.0
> - LED may react to device(s) in a USB 2.0 port(s).
> - Another common example is switch or router with multiple
> - Ethernet ports each of them having its own LED assigned
> - (assuming they are not hardwired). In such cases this
> - property should contain phandle(s) of related source
> - device(s).
> - In many cases LED can be related to more than one device
> - (e.g. one USB LED vs. multiple USB ports). Each source
> - should be represented by a node in the device tree and be
> - referenced by a phandle and a set of phandle arguments. A
> - length of arguments should be specified by the
> - #trigger-source-cells property in the source node.
> -
> -Required properties for flash LED child nodes:
> -- flash-max-microamp : Maximum flash LED supply current in microamperes.
> -- flash-max-timeout-us : Maximum timeout in microseconds after which the flash
> - LED is turned off.
> -
> -For controllers that have no configurable current the flash-max-microamp
> -property can be omitted.
> -For controllers that have no configurable timeout the flash-max-timeout-us
> -property can be omitted.
> -
> -* Trigger source providers
> -
> -Each trigger source should be represented by a device tree node. It may be e.g.
> -a USB port or an Ethernet device.
> -
> -Required properties for trigger source:
> -- #trigger-source-cells : Number of cells in a source trigger. Typically 0 for
> - nodes of simple trigger sources (e.g. a specific USB
> - port).
> -
> -* Examples
> -
> -#include <dt-bindings/leds/common.h>
> -
> -led-controller@0 {
> - compatible = "gpio-leds";
> -
> - led0 {
> - function = LED_FUNCTION_STATUS;
> - linux,default-trigger = "heartbeat";
> - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
> - };
> -
> - led1 {
> - function = LED_FUNCTION_USB;
> - gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> - trigger-sources = <&ohci_port1>, <&ehci_port1>;
> - };
> -};
> -
> -led-controller@0 {
> - compatible = "maxim,max77693-led";
> -
> - led {
> - function = LED_FUNCTION_FLASH;
> - color = <LED_COLOR_ID_WHITE>;
> - led-sources = <0>, <1>;
> - led-max-microamp = <50000>;
> - flash-max-microamp = <320000>;
> - flash-max-timeout-us = <500000>;
> - };
> -};
> -
> -led-controller@30 {
> - compatible = "panasonic,an30259a";
> - reg = <0x30>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - led@1 {
> - reg = <1>;
> - linux,default-trigger = "heartbeat";
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <1>;
> - };
> -
> - led@2 {
> - reg = <2>;
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <2>;
> - };
> -
> - led@3 {
> - reg = <3>;
> - function = LED_FUNCTION_INDICATOR;
> - function-enumerator = <3>;
> - };
> -};
> +This file has moved to ./common.yaml.
> diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
> new file mode 100644
> index 000000000000..16f0983277c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/common.yaml
> @@ -0,0 +1,228 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common leds properties
> +
> +maintainers:
> + - Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
> + - Pavel Machek <pavel@xxxxxx>
> +
> +description:
> + LED and flash LED devices provide the same basic functionality as current
> + regulators, but extended with LED and flash LED specific features like
> + blinking patterns, flash timeout, flash faults and external flash strobe mode.
> +
> + Many LED devices expose more than one current output that can be connected
> + to one or more discrete LED component. Since the arrangement of connections
> + can influence the way of the LED device initialization, the LED components
> + have to be tightly coupled with the LED device binding. They are represented
> + by child nodes of the parent LED device binding.
> +
> +properties:
> + led-sources:
> + description:
> + List of device current outputs the LED is connected to. The outputs are
> + identified by the numbers that must be defined in the LED device binding
> + documentation.
> + $ref: /schemas/types.yaml#definitions/uint32-array
> +
> + function:
> + description:
> + LED functon. Use one of the LED_FUNCTION_* prefixed definitions from the
I noticed there's a typo in function that I copied over.
Rob
