[PATCH v1 0/4] tps6105x add devicetree and leds support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I needed led operation for this mfd chip, so I added a very simple
driver for this.

My platform (arm imx6q) is devicetree-based, so I added optional
devicetree support for this chip and its sub-drivers.

Interestingly, the main mfd driver had a dt 'compatible' binding, but
could not operate without platform data?

Sven Van Asbroeck (4):
  tps6105x: add optional devicetree support
  regulator: tps6105x: add optional devicetree support
  leds: tps6105x: add driver for mfd chip led mode
  dt-bindings: mfd: update TI tps6105x chip bindings

 .../devicetree/bindings/mfd/tps6105x.txt      | 32 ++++++++-
 drivers/leds/Kconfig                          | 10 +++
 drivers/leds/Makefile                         |  1 +
 drivers/leds/leds-tps6105x.c                  | 68 +++++++++++++++++++
 drivers/mfd/tps6105x.c                        | 36 +++++++++-
 drivers/regulator/tps6105x-regulator.c        | 10 ++-
 6 files changed, 152 insertions(+), 5 deletions(-)
 create mode 100644 drivers/leds/leds-tps6105x.c

-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux