On Fri, Nov 1, 2019 at 12:43 PM Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> wrote: > Bucks 1,2,6 and 7 on ROHM BD71828 can be either controlled as > individual regulartors - or they can be grouped to a group of > regulators that are controlled by 'run levels'. This can be > done via I2C. Each regulator can be assigned a voltage and > enable/disable status for each run-level. These statuses are > also changeable via I2C. > > Run-levels can then be changed either by I2C or GPIO. This > control mechanism is selected by data in one time programmable > area (during production) and can't be changed later. > > Allow regulators to be controlled via run-levels and allow > getting/setting the current run-level also via GPIO. > > Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx> I like the way you use the gpio API so FWIW: Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> I do not understand the regulator parts of the patch. Yours, Linus Walleij
