The EC is in charge of controlling the keyboard backlight on
the Wilco platform. We expose a standard LED class device
named platform::kbd_backlight.
Since the EC will never change the backlight level of its own accord,
we don't need to implement a brightness_get() method.
Signed-off-by: Nick Crews <ncrews@xxxxxxxxxxxx>
Signed-off-by: Daniel Campello <campello@xxxxxxxxxxxx>
---
v8 changes:
-Removed unneeded #includes from keyboard_leds.h
v7 changes:
-Merged the LED stuff into the core wilco_ec module. This allows
us to de-duplicate a lot of code, hide a lot of the LED internals
from the core driver, and generally simplify things.
-Follow reverse xmas tree variable declaration
-Remove unneeded warning about BIOS not initializing the LEDs
-Fix and standardize some comments and log messages.
-Document all fields of wilco_keyboard_leds_msg
-rm outdated and useless comment at top of core file.
v6 changes:
-Rebased patch
-Fixed bug related to request/response buffer pointers on
send_kbbl_mesg()
-Now sends WILCO_KBBL_SUBCMD_SET_STATE instead of
WILCO_KBBL_SUBCMD_GET_STATE command for keyboard_led_set_brightness()
v5 changes:
-Rename the LED device to "platform::kbd_backlight", to
denote that this is the built-in system keyboard.
v4 changes:
-Call keyboard_led_set_brightness() directly within
initialize_brightness(), instead of calling the library function.
v3 changes:
-Since this behaves the same as the standard Chrome OS keyboard
backlight, rename the led device to "chromeos::kbd_backlight"
-Move wilco_ec_keyboard_backlight_exists() into core module, so
that the core does not depend upon the keyboard backlight driver.
-This required moving some code into wilco-ec.h
-Refactor out some common code in set_brightness() and
initialize_brightness()
v2 changes:
-Remove and fix uses of led vs LED in kconfig
-Assume BIOS initializes brightness, but double check in probe()
-Remove get_brightness() callback, as EC never changes brightness
by itself.
-Use a __packed struct as message instead of opaque array
-Add exported wilco_ec_keyboard_leds_exist() so the core driver
now only creates a platform _device if relevant
-Fix use of keyboard_led_set_brightness() since it can sleep
BUG=b:141952530
TEST=Built and tested on a Wilco, including rmmod and modprobe of
wilco-ec.
drivers/platform/chrome/wilco_ec/Makefile | 3 +-
drivers/platform/chrome/wilco_ec/core.c | 13 +-
.../platform/chrome/wilco_ec/keyboard_leds.c | 191 ++++++++++++++++++
include/linux/platform_data/wilco-ec.h | 13 ++
4 files changed, 215 insertions(+), 5 deletions(-)
create mode 100644 drivers/platform/chrome/wilco_ec/keyboard_leds.c
diff --git a/drivers/platform/chrome/wilco_ec/Makefile b/drivers/platform/chrome/wilco_ec/Makefile
index bc817164596e..ecb3145cab18 100644
--- a/drivers/platform/chrome/wilco_ec/Makefile
+++ b/drivers/platform/chrome/wilco_ec/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
-wilco_ec-objs := core.o mailbox.o properties.o sysfs.o
+wilco_ec-objs := core.o keyboard_leds.o mailbox.o \
+ properties.o sysfs.o
obj-$(CONFIG_WILCO_EC) += wilco_ec.o
wilco_ec_debugfs-objs := debugfs.o
obj-$(CONFIG_WILCO_EC_DEBUGFS) += wilco_ec_debugfs.o
diff --git a/drivers/platform/chrome/wilco_ec/core.c b/drivers/platform/chrome/wilco_ec/core.c
index 3724bf4b77c6..36c78e52ff3c 100644
--- a/drivers/platform/chrome/wilco_ec/core.c
+++ b/drivers/platform/chrome/wilco_ec/core.c
@@ -5,10 +5,6 @@
* Copyright 2018 Google LLC
*
* This is the entry point for the drivers that control the Wilco EC.
- * This driver is responsible for several tasks:
- * - Initialize the register interface that is used by wilco_ec_mailbox()
- * - Create a platform device which is picked up by the debugfs driver
- * - Create a platform device which is picked up by the RTC driver
*/
#include <linux/acpi.h>
@@ -87,6 +83,15 @@ static int wilco_ec_probe(struct platform_device *pdev)
goto unregister_debugfs;
}
+ /* Set up the keyboard backlight LEDs. */
+ ret = wilco_keyboard_leds_init(ec);
+ if (ret < 0) {
+ dev_err(dev,
+ "Failed to initialize keyboard LEDs: %d\n",
+ ret);
+ goto unregister_rtc;
+ }
+
ret = wilco_ec_add_sysfs(ec);
if (ret < 0) {
dev_err(dev, "Failed to create sysfs entries: %d", ret);
diff --git a/drivers/platform/chrome/wilco_ec/keyboard_leds.c b/drivers/platform/chrome/wilco_ec/keyboard_leds.c
new file mode 100644
index 000000000000..bb0edf51dfda
--- /dev/null
+++ b/drivers/platform/chrome/wilco_ec/keyboard_leds.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Keyboard backlight LED driver for the Wilco Embedded Controller
+ *
+ * Copyright 2019 Google LLC
+ *
+ * Since the EC will never change the backlight level of its own accord,
+ * we don't need to implement a brightness_get() method.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/slab.h>
+
+#define WILCO_EC_COMMAND_KBBL 0x75
+#define WILCO_KBBL_MODE_FLAG_PWM BIT(1) /* Set brightness by percent. */
+#define WILCO_KBBL_DEFAULT_BRIGHTNESS 0
+
+struct wilco_keyboard_leds {
+ struct wilco_ec_device *ec;
+ struct led_classdev keyboard;
+};
+
+enum wilco_kbbl_subcommand {
+ WILCO_KBBL_SUBCMD_GET_FEATURES = 0x00,
+ WILCO_KBBL_SUBCMD_GET_STATE = 0x01,
+ WILCO_KBBL_SUBCMD_SET_STATE = 0x02,
+};
+
+/**
+ * struct wilco_keyboard_leds_msg - Message to/from EC for keyboard LED control.
+ * @command: Always WILCO_EC_COMMAND_KBBL.
+ * @status: Set by EC to 0 on success, 0xFF on failure.
+ * @subcmd: One of enum wilco_kbbl_subcommand.
+ * @reserved3: Should be 0.
+ * @mode: Bit flags for used mode, we want to use WILCO_KBBL_MODE_FLAG_PWM.
+ * @reserved5to8: Should be 0.
+ * @percent: Brightness in 0-100. Only meaningful in PWM mode.
+ * @reserved10to15: Should be 0.
+ */
+struct wilco_keyboard_leds_msg {
+ u8 command;
+ u8 status;
+ u8 subcmd;
+ u8 reserved3;
+ u8 mode;
+ u8 reserved5to8[4];
+ u8 percent;
+ u8 reserved10to15[6];
+} __packed;
+
+/* Send a request, get a response, and check that the response is good. */
+static int send_kbbl_msg(struct wilco_ec_device *ec,
+ struct wilco_keyboard_leds_msg *request,
+ struct wilco_keyboard_leds_msg *response)
+{
+ struct wilco_ec_message msg;
+ int ret;
+
+ memset(&msg, 0, sizeof(msg));
+ msg.type = WILCO_EC_MSG_LEGACY;
+ msg.request_data = request;
+ msg.request_size = sizeof(*request);
+ msg.response_data = response;
+ msg.response_size = sizeof(*response);
+
+ ret = wilco_ec_mailbox(ec, &msg);
+ if (ret < 0) {
+ dev_err(ec->dev,
+ "Failed sending keyboard LEDs command: %d", ret);
+ return ret;
+ }
+
+ if (response->status) {
+ dev_err(ec->dev,
+ "EC reported failure sending keyboard LEDs command: %d",
+ response->status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int set_kbbl(struct wilco_ec_device *ec, enum led_brightness brightness)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_SET_STATE;
+ request.mode = WILCO_KBBL_MODE_FLAG_PWM;
+ request.percent = brightness;
+
+ return send_kbbl_msg(ec, &request, &response);
+}
+
+static int kbbl_exist(struct wilco_ec_device *ec, bool *exists)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_FEATURES;
+
+ ret = send_kbbl_msg(ec, &request, &response);
+ if (ret < 0)
+ return ret;
+
+ *exists = response.status != 0xFF;
+
+ return 0;
+}
+
+/**
+ * kbbl_init() - Initialize the state of the keyboard backlight.
+ * @ec: EC device to talk to.
+ *
+ * Gets the current brightness, ensuring that the BIOS already initialized the
+ * backlight to PWM mode. If not in PWM mode, then the current brightness is
+ * meaningless, so set the brightness to WILCO_KBBL_DEFAULT_BRIGHTNESS.
+ *
+ * Return: Final brightness of the keyboard, or negative error code on failure.
+ */
+static int kbbl_init(struct wilco_ec_device *ec)
+{
+ struct wilco_keyboard_leds_msg request;
+ struct wilco_keyboard_leds_msg response;
+ int ret;
+
+ memset(&request, 0, sizeof(request));
+ request.command = WILCO_EC_COMMAND_KBBL;
+ request.subcmd = WILCO_KBBL_SUBCMD_GET_STATE;
+
+ ret = send_kbbl_msg(ec, &request, &response);
+ if (ret < 0)
+ return ret;
+
+ if (response.mode & WILCO_KBBL_MODE_FLAG_PWM)
+ return response.percent;
+
+ ret = set_kbbl(ec, WILCO_KBBL_DEFAULT_BRIGHTNESS);
+ if (ret < 0)
+ return ret;
+
+ return WILCO_KBBL_DEFAULT_BRIGHTNESS;
+}
+
+static int wilco_keyboard_leds_set(struct led_classdev *cdev,
+ enum led_brightness brightness)
+{
+ struct wilco_keyboard_leds *wkl =
+ container_of(cdev, struct wilco_keyboard_leds, keyboard);
+ return set_kbbl(wkl->ec, brightness);
+}
+
+int wilco_keyboard_leds_init(struct wilco_ec_device *ec)
+{
+ struct wilco_keyboard_leds *wkl;
+ bool leds_exist;
+ int ret;
+
+ ret = kbbl_exist(ec, &leds_exist);
+ if (ret < 0) {
+ dev_err(ec->dev,
+ "Failed checking keyboard LEDs support: %d", ret);
+ return ret;
+ }
+ if (!leds_exist)
+ return 0;
+
+ wkl = devm_kzalloc(ec->dev, sizeof(*wkl), GFP_KERNEL);
+ if (!wkl)
+ return -ENOMEM;
+
+ wkl->ec = ec;
+ wkl->keyboard.name = "platform::kbd_backlight";
+ wkl->keyboard.max_brightness = 100;
+ wkl->keyboard.flags = LED_CORE_SUSPENDRESUME;
+ wkl->keyboard.brightness_set_blocking = wilco_keyboard_leds_set;
+ ret = kbbl_init(ec);
+ if (ret < 0)
+ return ret;
+ wkl->keyboard.brightness = ret;
+
+ return devm_led_classdev_register(ec->dev, &wkl->keyboard);
+}
diff --git a/include/linux/platform_data/wilco-ec.h b/include/linux/platform_data/wilco-ec.h
index ad03b586a095..0f7df3498a24 100644
--- a/include/linux/platform_data/wilco-ec.h
+++ b/include/linux/platform_data/wilco-ec.h
@@ -120,6 +120,19 @@ struct wilco_ec_message {
*/
int wilco_ec_mailbox(struct wilco_ec_device *ec, struct wilco_ec_message *msg);
+/**
+ * wilco_keyboard_leds_init() - Set up the keyboard backlight LEDs.
+ * @ec: EC device to query.
+ *
+ * After this call, the keyboard backlight will be exposed through a an LED
+ * device at /sys/class/leds.
+ *
+ * This may sleep because it uses wilco_ec_mailbox().
+ *
+ * Return: 0 on success, negative error code on failure.
+ */
+int wilco_keyboard_leds_init(struct wilco_ec_device *ec);
+
/*
* A Property is typically a data item that is stored to NVRAM
* by the EC. Each of these data items has an index associated
--
2.21.0
