Add a property for each control bank to configure the full scale current setting for the device. Acked-by: Pavel Machek <pavel@xxxxxx> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> --- v3 - No changes - https://lore.kernel.org/patchwork/patch/1114540/ Documentation/devicetree/bindings/leds/leds-lm3532.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt index c087f85ddddc..53793213dd52 100644 --- a/Documentation/devicetree/bindings/leds/leds-lm3532.txt +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt @@ -62,6 +62,9 @@ Optional LED child properties: - label : see Documentation/devicetree/bindings/leds/common.txt - linux,default-trigger : see Documentation/devicetree/bindings/leds/common.txt + - led-max-microamp : Defines the full scale current value for each control + bank. The range is from 5000uA-29800uA in increments + of 800uA. Example: led-controller@38 { @@ -85,6 +88,7 @@ led-controller@38 { reg = <0>; led-sources = <2>; ti,led-mode = <1>; + led-max-microamp = <21800>; label = ":backlight"; linux,default-trigger = "backlight"; }; -- 2.22.0.214.g8dca754b1e
