Dan,
On 8/1/19 5:14 PM, Dan Murphy wrote:
> Add a property for each control bank to configure the
> full scale current setting for the device.
>
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
> Documentation/devicetree/bindings/leds/leds-lm3532.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
> index c087f85ddddc..d3498dd24e8e 100644
> --- a/Documentation/devicetree/bindings/leds/leds-lm3532.txt
> +++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
> @@ -62,6 +62,9 @@ Optional LED child properties:
> - label : see Documentation/devicetree/bindings/leds/common.txt
> - linux,default-trigger :
> see Documentation/devicetree/bindings/leds/common.txt
> + - ti,fs-current : Defines the full scale current value for each control
> + bank. The range is from 5000uA-29800uA in increments
> + of 800uA.
Wouldn't led-max-microamp fit here?
>
> Example:
> led-controller@38 {
> @@ -85,6 +88,7 @@ led-controller@38 {
> reg = <0>;
> led-sources = <2>;
> ti,led-mode = <1>;
> + ti,fs-current = <21800>;
> label = ":backlight";
> linux,default-trigger = "backlight";
> };
>
--
Best regards,
Jacek Anaszewski
