There is a typo in KTD2962_MM_MIN_CURR_THRESHOLD_SCALE. 6 and 9 are switched in 2962. Define and use KTD2692_MM_MIN_CURR_THRESHOLD_SCALE instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx> --- drivers/leds/leds-ktd2692.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/leds/leds-ktd2692.c b/drivers/leds/leds-ktd2692.c index 45296aaca9da..44db748c570e 100644 --- a/drivers/leds/leds-ktd2692.c +++ b/drivers/leds/leds-ktd2692.c @@ -22,7 +22,7 @@ /* Value related the movie mode */ #define KTD2692_MOVIE_MODE_CURRENT_LEVELS 16 #define KTD2692_MM_TO_FL_RATIO(x) ((x) / 3) -#define KTD2962_MM_MIN_CURR_THRESHOLD_SCALE 8 +#define KTD2692_MM_MIN_CURR_THRESHOLD_SCALE 8 /* Value related the flash mode */ #define KTD2692_FLASH_MODE_TIMEOUT_LEVELS 8 @@ -253,7 +253,7 @@ static void ktd2692_setup(struct ktd2692_context *led) ktd2692_expresswire_reset(led); gpiod_direction_output(led->aux_gpio, KTD2692_LOW); - ktd2692_expresswire_write(led, (KTD2962_MM_MIN_CURR_THRESHOLD_SCALE - 1) + ktd2692_expresswire_write(led, (KTD2692_MM_MIN_CURR_THRESHOLD_SCALE - 1) | KTD2692_REG_MM_MIN_CURR_THRESHOLD_BASE); ktd2692_expresswire_write(led, KTD2692_FLASH_MODE_CURR_PERCENT(45) | KTD2692_REG_FLASH_CURRENT_BASE); -- 2.20.1
