[PATCH] input: st1232.c: Add devicetree attributes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add support for rotating and inverted axis for the Sitronix ST1232 touchscreen controller.

For the rotation of the touchscreen the devicetree resolution propteries are requierd. For this purpose the following devicetree mappings are implemented:

- touchscreen-size-x
- touchscreen-size-y
- touchscreen-inverted-x
- touchscreen-inverted-y
- touchscreen-swapped-x-y

Signed-off-by: Sander Vermin <sander@xxxxxxxxx>
---
 .../bindings/input/touchscreen/sitronix-st1232.txt |  18 +-
 drivers/input/touchscreen/st1232.c                 | 362 +++++++++++++++------
 2 files changed, 272 insertions(+), 108 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
index 64ad48b..1dcd1b6 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt
@@ -1,12 +1,18 @@
 * Sitronix st1232 touchscreen controller
 
 Required properties:
-- compatible: must be "sitronix,st1232"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
+- compatible		: must be "sitronix,st1232"
+- reg			: I2C address of the chip
+- interrupts		: interrupt to which the chip is connected
+- touchscreen-size-x	: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y	: vertical resolution of touchscreen (in pixels)
+
 
 Optional properties:
-- gpios: a phandle to the reset GPIO
+- gpios			: a phandle to the reset GPIO
+- touchscreen-inverted-x	: X axis is inverted (boolean)
+- touchscreen-inverted-y	: Y axis is inverted (boolean)
+- touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)
 
 Example:
 
@@ -18,6 +24,10 @@ Example:
 			reg = <0x55>;
 			interrupts = <2 0>;
 			gpios = <&gpio1 166 0>;
+			touchscreen-size-y = <800>;
+			touchscreen-size-x = <480>;
+			touchscreen-inverted-y;
+			touchscreen-swapped-x-y;
 		};
 
 		/* ... */
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
index e943678..0458a29 100644
--- a/drivers/input/touchscreen/st1232.c
+++ b/drivers/input/touchscreen/st1232.c
@@ -1,6 +1,9 @@
 /*
  * ST1232 Touchscreen Controller Driver
  *
+ * Copyright (C) 2015 Sander Vermin
+ *	Sander Vermin <sander@xxxxxxxxx>
+ *
  * Copyright (C) 2010 Renesas Solutions Corp.
  *	Tony SIM <chinyeow.sim.xt@xxxxxxxxxxx>
  *
@@ -22,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -31,70 +35,89 @@
 #include <linux/types.h>
 #include <linux/platform_data/st1232_pdata.h>
 
-#define ST1232_TS_NAME	"st1232-ts"
+#define ST1232_REG_STATUS	0x01
+#define ST1232_REG_CONTROL	0x02
+#define ST1232_REG_XY_RES	0x04
+#define ST1232_REG_TOUCHDATA	0x10
+
+#define ST1232_POWER_DOWN	0x02
 
-#define MIN_X		0x00
-#define MIN_Y		0x00
-#define MAX_X		0x31f	/* (800 - 1) */
-#define MAX_Y		0x1df	/* (480 - 1) */
-#define MAX_AREA	0xff
-#define MAX_FINGERS	2
+#define ST1232_MAX_FINGERS	2
+#define ST1232_MAX_RESOLUTION	800
+#define ST1232_TS_NAME		"st1232-ts"
 
 struct st1232_ts_finger {
 	u16 x;
 	u16 y;
-	u8 t;
+	u8 z;
 	bool is_valid;
 };
 
-struct st1232_ts_data {
+struct st1232_touch_data {
+	__u8 softbutton;
+	__u8 finger_count;
+	struct st1232_ts_finger finger[ST1232_MAX_FINGERS];
+};
+
+struct st1232_data {
 	struct i2c_client *client;
 	struct input_dev *input_dev;
-	struct st1232_ts_finger finger[MAX_FINGERS];
 	struct dev_pm_qos_request low_latency_req;
 	int reset_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
 };
 
-static int st1232_ts_read_data(struct st1232_ts_data *ts)
+static int st1232_ts_read_data(struct i2c_client *client,
+				   struct st1232_touch_data *touch_data)
 {
-	struct st1232_ts_finger *finger = ts->finger;
-	struct i2c_client *client = ts->client;
-	struct i2c_msg msg[2];
 	int error;
-	u8 start_reg;
+	u8 start_reg = ST1232_REG_TOUCHDATA;
 	u8 buf[10];
 
-	/* read touchscreen data from ST1232 */
-	msg[0].addr = client->addr;
-	msg[0].flags = 0;
-	msg[0].len = 1;
-	msg[0].buf = &start_reg;
-	start_reg = 0x10;
-
-	msg[1].addr = ts->client->addr;
-	msg[1].flags = I2C_M_RD;
-	msg[1].len = sizeof(buf);
-	msg[1].buf = buf;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &start_reg
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(buf),
+			.buf = (u8 *)buf
+		}
+	};
 
 	error = i2c_transfer(client->adapter, msg, 2);
 	if (error < 0)
 		return error;
 
+	/* get number of fingers */
+	touch_data->finger_count = buf[0] & 0x7;
+
+	/* get softkeys */
+	touch_data->softbutton = buf[1];
+
 	/* get "valid" bits */
-	finger[0].is_valid = buf[2] >> 7;
-	finger[1].is_valid = buf[5] >> 7;
-
-	/* get xy coordinate */
-	if (finger[0].is_valid) {
-		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
-		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
-		finger[0].t = buf[8];
+	touch_data->finger[0].is_valid = buf[2] >> 7;
+	touch_data->finger[1].is_valid = buf[5] >> 7;
+
+	/* get coordinate finger 0 */
+	if (touch_data->finger[0].is_valid) {
+		touch_data->finger[0].x = ((buf[2] & 0x70) << 4) | buf[3];
+		touch_data->finger[0].y = ((buf[2] & 0x07) << 8) | buf[4];
+		touch_data->finger[0].z = buf[8];
 	}
 
-	if (finger[1].is_valid) {
-		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
-		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
-		finger[1].t = buf[9];
+	/* get coordinate finger 1 */
+	if (touch_data->finger[1].is_valid) {
+		touch_data->finger[1].x = ((buf[5] & 0x70) << 4) | buf[6];
+		touch_data->finger[1].y = ((buf[5] & 0x07) << 8) | buf[7];
+		touch_data->finger[1].z = buf[9];
 	}
 
 	return 0;
@@ -102,59 +125,155 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts)
 
 static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
 {
-	struct st1232_ts_data *ts = dev_id;
-	struct st1232_ts_finger *finger = ts->finger;
+	struct st1232_data *ts = dev_id;
 	struct input_dev *input_dev = ts->input_dev;
-	int count = 0;
+	struct st1232_touch_data st_tdata;
 	int i, ret;
 
-	ret = st1232_ts_read_data(ts);
-	if (ret < 0)
-		goto end;
+	ret = st1232_ts_read_data(ts->client, &st_tdata);
+	if (ret < 0) {
+		dev_err(dev_id, "Error reading touch data: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	if (st_tdata.finger_count > ST1232_MAX_FINGERS) {
+		dev_warn(dev_id, "Too many fingers %d > %d\n",
+			 st_tdata.finger_count, ST1232_MAX_FINGERS);
+		st_tdata.finger_count = ST1232_MAX_FINGERS;
+	}
 
 	/* multi touch protocol */
-	for (i = 0; i < MAX_FINGERS; i++) {
-		if (!finger[i].is_valid)
+	for (i = 0; i < ST1232_MAX_FINGERS; i++) {
+		input_mt_slot(input_dev, i);
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
+						st_tdata.finger[i].is_valid);
+		if (!st_tdata.finger[i].is_valid)
 			continue;
 
-		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
-		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
-		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
-		input_mt_sync(input_dev);
-		count++;
-	}
-
-	/* SYN_MT_REPORT only if no contact */
-	if (!count) {
-		input_mt_sync(input_dev);
-		if (ts->low_latency_req.dev) {
-			dev_pm_qos_remove_request(&ts->low_latency_req);
-			ts->low_latency_req.dev = NULL;
+		input_report_abs(input_dev, ABS_MT_PRESSURE,
+					st_tdata.finger[i].z);
+
+		if (ts->invert_x)
+			st_tdata.finger[i].x = ts->max_x - st_tdata.finger[i].x;
+
+		if (ts->invert_y)
+			st_tdata.finger[i].y = ts->max_y - st_tdata.finger[i].y;
+
+		if (!ts->swap_x_y) {
+			input_event(input_dev, EV_ABS, ABS_MT_POSITION_X,
+					st_tdata.finger[i].x);
+			input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y,
+					st_tdata.finger[i].y);
+		} else {
+			input_event(input_dev, EV_ABS, ABS_MT_POSITION_X,
+					st_tdata.finger[i].y);
+			input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y,
+					st_tdata.finger[i].x);
 		}
-	} else if (!ts->low_latency_req.dev) {
-		/* First contact, request 100 us latency. */
-		dev_pm_qos_add_ancestor_request(&ts->client->dev,
-						&ts->low_latency_req,
-						DEV_PM_QOS_RESUME_LATENCY, 100);
 	}
 
 	/* SYN_REPORT */
+	input_mt_sync_frame(input_dev);
 	input_sync(input_dev);
 
-end:
 	return IRQ_HANDLED;
 }
 
-static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
+static void st1232_ts_power(struct st1232_data *ts, bool poweron)
 {
+	/* only operates reset-pin */
 	if (gpio_is_valid(ts->reset_gpio))
 		gpio_direction_output(ts->reset_gpio, poweron);
 }
 
+static int st1232_start(struct input_dev *dev)
+{
+	struct st1232_data *data = input_get_drvdata(dev);
+	struct st1232_touch_data touch_data;
+	int error;
+	int count;
+
+	u8 start_reg = ST1232_REG_XY_RES;
+	u8 buf[3];
+	/* set high nible of x and y resolution */
+	buf[0] = ((data->max_x >> 8) << 4) | (data->max_y >> 8);
+	/* set low byte of x resolution */
+	buf[1] = data->max_x;
+	/* set low byte of x resolution */
+	buf[2] = data->max_y;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = data->client->addr,
+			.len = 1,
+			.buf = &start_reg
+		},
+		{
+			.addr = data->client->addr,
+			.flags = 0,
+			.len = sizeof(buf),
+			.buf = (u8 *)buf
+		}
+	};
+
+	/* set reset-pin high */
+	st1232_ts_power(data, true);
+
+	/* read status register, check for erros */
+	count = 0;
+	while (i2c_smbus_read_byte_data(data->client, ST1232_REG_STATUS) != 0) {
+		/* wait for the device to come up */
+		msleep(20);
+		count++;
+		if (count > 10) {
+			dev_err(&data->client->dev, "Device status Not OKE\n");
+			return -EINVAL;
+		}
+	}
+
+	/* write 0 for defaults, disable powerdown */
+	i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL, 0);
+
+	/* write settings to controller */
+	error = i2c_transfer(data->client->adapter, msg, 2);
+	if (error < 0)
+		return error;
+
+	/* read touch data to disgard possible interrupt */
+	error = st1232_ts_read_data(data->client, &touch_data);
+	if (error < 0)
+		return error;
+
+	/* enable interrupt */
+	enable_irq(data->client->irq);
+
+	dev_info(&data->client->dev, "Touchscreen device started\n");
+
+	return 0;
+}
+
+static void st1232_stop(struct input_dev *dev)
+{
+	struct st1232_data *data = input_get_drvdata(dev);
+
+	/* disable interrupt */
+	disable_irq(data->client->irq);
+
+	/* write powerdown to touchscreen */
+	i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL,
+					ST1232_POWER_DOWN);
+
+	/* set reset-pin low */
+	st1232_ts_power(data, false);
+
+	dev_info(&data->client->dev, "Touchscreen device stopped\n");
+}
+
 static int st1232_ts_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
-	struct st1232_ts_data *ts;
+	struct st1232_data *ts;
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
 	struct st1232_pdata *pdata = dev_get_platdata(&client->dev);
 	struct input_dev *input_dev;
 	int error;
@@ -177,8 +296,25 @@ static int st1232_ts_probe(struct i2c_client *client,
 	if (!input_dev)
 		return -ENOMEM;
 
-	ts->client = client;
-	ts->input_dev = input_dev;
+	if (of_property_read_u32(np, "touchscreen-size-x", &ts->max_x) ||
+	    of_property_read_u32(np, "touchscreen-size-y", &ts->max_y)) {
+		dev_err(&client->dev,
+			"Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	if (ts->max_x > ST1232_MAX_RESOLUTION ||
+			ts->max_y > ST1232_MAX_RESOLUTION) {
+		dev_err(&client->dev,
+			"Error touchscreen-size-x and/or -y exceding maximum of %d\n",
+			ST1232_MAX_RESOLUTION);
+		return -EINVAL;
+	}
+
+	/* Optional device tree properties */
+	ts->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+	ts->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+	ts->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
 
 	if (pdata)
 		ts->reset_gpio = pdata->reset_gpio;
@@ -197,30 +333,46 @@ static int st1232_ts_probe(struct i2c_client *client,
 		}
 	}
 
-	st1232_ts_power(ts, true);
-
-	input_dev->name = "st1232-touchscreen";
+	input_dev->name = client->name;
 	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = &client->dev;
+	input_dev->open = st1232_start;
+	input_dev->close = st1232_stop;
+	input_dev->dev.parent = dev;
+
+	if (!ts->swap_x_y) {
+		input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+				     ts->max_x, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+				     ts->max_y, 0, 0);
+	} else {
+		input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+				     ts->max_y, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+				     ts->max_x, 0, 0);
+	}
 
-	__set_bit(EV_SYN, input_dev->evbit);
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(EV_ABS, input_dev->evbit);
+	error = input_mt_init_slots(input_dev, ST1232_MAX_FINGERS,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
 
-	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
-	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+	ts->client = client;
+	ts->input_dev = input_dev;
+	input_set_drvdata(input_dev, ts);
 
 	error = devm_request_threaded_irq(&client->dev, client->irq,
 					  NULL, st1232_ts_irq_handler,
 					  IRQF_ONESHOT,
 					  client->name, ts);
 	if (error) {
-		dev_err(&client->dev, "Failed to register interrupt\n");
+		dev_err(&client->dev, "Error requesting irq: %d\n", error);
 		return error;
 	}
 
-	error = input_register_device(ts->input_dev);
+	/* Stop device till opened */
+	st1232_stop(ts->input_dev);
+
+	error = input_register_device(input_dev);
 	if (error) {
 		dev_err(&client->dev, "Unable to register %s input device\n",
 			input_dev->name);
@@ -228,6 +380,8 @@ static int st1232_ts_probe(struct i2c_client *client,
 	}
 
 	i2c_set_clientdata(client, ts);
+
+	/* allow the device to wake */
 	device_init_wakeup(&client->dev, 1);
 
 	return 0;
@@ -235,43 +389,43 @@ static int st1232_ts_probe(struct i2c_client *client,
 
 static int st1232_ts_remove(struct i2c_client *client)
 {
-	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+	struct st1232_data *ts = i2c_get_clientdata(client);
 
 	device_init_wakeup(&client->dev, 0);
+
+	/* set reset-pin low */
 	st1232_ts_power(ts, false);
 
 	return 0;
 }
 
-static int __maybe_unused st1232_ts_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int st1232_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+	struct st1232_data *data = i2c_get_clientdata(client);
 
-	if (device_may_wakeup(&client->dev)) {
-		enable_irq_wake(client->irq);
-	} else {
-		disable_irq(client->irq);
-		st1232_ts_power(ts, false);
-	}
+	mutex_lock(&data->input_dev->mutex);
+	if (data->input_dev->users)
+		st1232_stop(data->input_dev);
+	mutex_unlock(&data->input_dev->mutex);
 
 	return 0;
 }
 
-static int __maybe_unused st1232_ts_resume(struct device *dev)
+static int st1232_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+	struct st1232_data *data = i2c_get_clientdata(client);
 
-	if (device_may_wakeup(&client->dev)) {
-		disable_irq_wake(client->irq);
-	} else {
-		st1232_ts_power(ts, true);
-		enable_irq(client->irq);
-	}
+	mutex_lock(&data->input_dev->mutex);
+	if (data->input_dev->users)
+		st1232_start(data->input_dev);
+	mutex_unlock(&data->input_dev->mutex);
 
 	return 0;
 }
+#endif
 
 static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
 			 st1232_ts_suspend, st1232_ts_resume);
@@ -282,13 +436,12 @@ static const struct i2c_device_id st1232_ts_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
 
-#ifdef CONFIG_OF
-static const struct of_device_id st1232_ts_dt_ids[] = {
+static const struct of_device_id st1232_of_match[] = {
 	{ .compatible = "sitronix,st1232", },
 	{ }
 };
-MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
-#endif
+MODULE_DEVICE_TABLE(of, st1232_of_match);
+
 
 static struct i2c_driver st1232_ts_driver = {
 	.probe		= st1232_ts_probe,
@@ -296,13 +449,14 @@ static struct i2c_driver st1232_ts_driver = {
 	.id_table	= st1232_ts_id,
 	.driver = {
 		.name	= ST1232_TS_NAME,
-		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
+		.owner	= THIS_MODULE,
+		.of_match_table = st1232_of_match,
 		.pm	= &st1232_ts_pm_ops,
 	},
 };
 
 module_i2c_driver(st1232_ts_driver);
 
-MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@xxxxxxxxxxx>");
+MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@xxxxxxxxxxx>, Sander Vermin <sander@xxxxxxxxx>");
 MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
 MODULE_LICENSE("GPL");
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media Devel]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Linux Wireless Networking]     [Linux Omap]

  Powered by Linux