On Tue, 10 Dec 2024 00:38:45 +0100
Vasileios Amoiridis <vassilisamir@xxxxxxxxx> wrote:
> The BMP{2,3,5}80 and BME280 devices have an SPI interface, so include it
> in the device-tree.
>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
Stray blank line at end of file. I fixed that up and applied,
Thanks,
Jonathan
> ---
> .../bindings/iio/pressure/bmp085.yaml | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> index cb201cecfa1a..017abe8eb9c5 100644
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
> @@ -55,12 +55,16 @@ properties:
> If not set, defaults to push-pull configuration.
> type: boolean
>
> + spi-max-frequency:
> + maximum: 10000000
> +
> required:
> - compatible
> - vddd-supply
> - vdda-supply
>
> allOf:
> + - $ref: /schemas/spi/spi-peripheral-props.yaml#
> - if:
> properties:
> compatible:
> @@ -73,6 +77,16 @@ allOf:
> then:
> properties:
> interrupts: false
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - bosch,bmp085
> + - bosch,bmp180
> + then:
> + properties:
> + spi-max-frequency: false
>
> additionalProperties: false
>
> @@ -93,3 +107,19 @@ examples:
> vdda-supply = <&bar>;
> };
> };
> + - |
> + # include <dt-bindings/gpio/gpio.h>
> + # include <dt-bindings/interrupt-controller/irq.h>
> + spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pressure@0 {
> + compatible = "bosch,bmp280";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
> + vddd-supply = <&foo>;
> + vdda-supply = <&bar>;
> + };
> + };
> +
