Add a new binding for SPI offload trigger sources. Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx> --- v5 changes: * Add MAINTAINERS entry. v4 changes: new patch in v4. FWIW, this is essentially identical to the leds trigger-source binding. --- .../devicetree/bindings/spi/trigger-source.yaml | 28 ++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 29 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/trigger-source.yaml b/Documentation/devicetree/bindings/spi/trigger-source.yaml new file mode 100644 index 000000000000..d64367726af2 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/trigger-source.yaml @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/trigger-source.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Trigger source providers for SPI offloads + +maintainers: + - David Lechner <dlechner@xxxxxxxxxxxx> + +description: + Each trigger source provider should be represented by a device tree node. It + may be e.g. a SPI peripheral chip or a clock source. + +properties: + '#trigger-source-cells': + description: + Number of cells in a source trigger. Typically 0 for nodes of simple + trigger sources. For nodes with more than one output signal, the first + cell be used to specify which output signal to use. If the same signal is + available on more than one pin, the second cell can be used to specify + which pin to use. + enum: [ 0, 1, 2 ] + +additionalProperties: true + +... diff --git a/MAINTAINERS b/MAINTAINERS index 75c8ca9a8584..91a4a7eb6194 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -22021,6 +22021,7 @@ F: include/linux/mtd/spi-nor.h SPI OFFLOAD R: David Lechner <dlechner@xxxxxxxxxxxx> +F: Documentation/devicetree/bindings/spi/trigger-source.yaml F: drivers/spi/spi-offload.c F: include/linux/spi/spi-offload.h K: spi_offload -- 2.43.0
