Re: [PATCH v4 03/11] dt-bindings: iio: dac: adi-axi-dac: add ad3552r axi variant

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 03 Oct 2024 19:29:00 +0200, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> 
> Add a new compatible and related bindigns for the fpga-based
> "ad3552r" AXI IP core, a variant of the generic AXI DAC IP.
> 
> The AXI "ad3552r" IP is a very similar HDL (fpga) variant of the
> generic AXI "DAC" IP, intended to control ad3552r and similar chips,
> mainly to reach high speed transfer rates using a QSPI DDR
> (dobule-data-rate) interface.
> 
> The ad3552r device is defined as a child of the AXI DAC, that in
> this case is acting as an SPI controller.
> 
> Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/dac/adi,axi-dac.yaml   | 49 +++++++++++++++++++++-
>  1 file changed, 48 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.example.dtb: dac@0: spi-max-frequency: 66000000 is greater than the maximum of 30000000
	from schema $id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/dac/adi,axi-dac.example.dtb: dac@0: 'io-backends' does not match any of the regexes: '^channel@([0-1])$', 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/iio/dac/adi,ad3552r.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241003-wip-bl-ad3552r-axi-v0-iio-testing-v4-3-ceb157487329@xxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux