On Sun, 21 Jul 2024 15:44:31 +0530, Kaustabh Chakraborty wrote: > STK3013 is a proximity sensor by Sensortek, bearing chipid of 0x31. Despite > being marketed as a proximity sensor, it also appears to have ambient > light sensing capabilities. > > The part is fully compatible with the existing implementation of the > device driver. Add the compatible string of stk3013 to the existing > list, with a fallback of stk3310. > > Signed-off-by: Kaustabh Chakraborty <kauschluss@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/iio/light/stk33xx.yaml | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:23:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:27:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/iio/light/stk33xx.yaml:28:11: [warning] wrong indentation: expected 12 but found 10 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240721-stk3310-v3-3-98fcb6f551a1@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
