On Sun, 11 Feb 2024 09:56:31 +0200 Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx> wrote: > This set of patches covers the following: > > - small cleanup > - mandatory 2ms delay between readings > - support for triggered buffer readings Hi Petre Applied to the togreg branch of iio.git but that will initially be pushed out as testing for 0-day to take a look at it. Thanks, Jonathan > > The support for devices that have "sleep mode" factory option that was > present in v1 of this patchset was removed, for a few reasons: > > - a Honeywell employee told me that this chip variant is extremely > unlikely to be found in the wild, which also makes testing the > driver functionality impossible > - I found no reliable way of generating i2c/spi bus traffic with no > payload (toggle CS for SPI case, send i2c packet containing only > the address byte) that are required for the wakeup sequence. > > Petre Rodan (6): > dt-bindings: iio: pressure: honeywell,hsc030pa.yaml add spi props > iio: pressure: hsc030pa: use signed type to hold div_64() result > iio: pressure: hsc030pa: include cleanup > iio: pressure: hsc030pa: update datasheet URLs > iio: pressure: hsc030pa add mandatory delay > iio: pressure: hsc030pa add triggered buffer > > .../iio/pressure/honeywell,hsc030pa.yaml | 3 ++ > drivers/iio/pressure/Kconfig | 2 + > drivers/iio/pressure/hsc030pa.c | 49 ++++++++++++++++++- > drivers/iio/pressure/hsc030pa.h | 7 +++ > drivers/iio/pressure/hsc030pa_i2c.c | 9 +++- > drivers/iio/pressure/hsc030pa_spi.c | 7 ++- > 6 files changed, 73 insertions(+), 4 deletions(-) >
