Re: [PATCH v7 9/9] iio: adc: adi-axi-adc: move to backend framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 23 Jan 2024 16:14:30 +0100
Nuno Sa via B4 Relay <devnull+nuno.sa.analog.com@xxxxxxxxxx> wrote:

> From: Nuno Sa <nuno.sa@xxxxxxxxxx>
> 
> Move to the IIO backend framework. Devices supported by adi-axi-adc now
> register themselves as backend devices.
> 
> Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
I'm still not getting the %d vs %c change..

Otherwise LGTM

> -	if (cl->info->version > ver) {
> +	if (*expected_ver > ver) {
>  		dev_err(&pdev->dev,
> -			"IP core version is too old. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
> -			ADI_AXI_PCORE_VER_MAJOR(cl->info->version),
> -			ADI_AXI_PCORE_VER_MINOR(cl->info->version),
> -			ADI_AXI_PCORE_VER_PATCH(cl->info->version),
> +			"IP core version is too old. Expected %d.%.2d.%d, Reported %d.%.2d.%c\n",

If it's a valid change fine, but then I'd expect both %c to change.
I'd also expect it to be in a separate patch with an explanation of why.

> +			ADI_AXI_PCORE_VER_MAJOR(*expected_ver),
> +			ADI_AXI_PCORE_VER_MINOR(*expected_ver),
> +			ADI_AXI_PCORE_VER_PATCH(*expected_ver),
>  			ADI_AXI_PCORE_VER_MAJOR(ver),
>  			ADI_AXI_PCORE_VER_MINOR(ver),
>  			ADI_AXI_PCORE_VER_PATCH(ver));
>  		return -ENODEV;
>  	}
>  
> -	indio_dev->info = &adi_axi_adc_info;
> -	indio_dev->name = "adi-axi-adc";
> -	indio_dev->modes = INDIO_DIRECT_MODE;
> -	indio_dev->num_channels = conv->chip_info->num_channels;
> -	indio_dev->channels = conv->chip_info->channels;
> -
> -	ret = adi_axi_adc_config_dma_buffer(&pdev->dev, indio_dev);
> +	ret = devm_iio_backend_register(&pdev->dev, &adi_axi_adc_generic, st);
>  	if (ret)
>  		return ret;
>  
> -	ret = adi_axi_adc_setup_channels(&pdev->dev, st);
> -	if (ret)
> -		return ret;
> -
> -	ret = devm_iio_device_register(&pdev->dev, indio_dev);
> -	if (ret)
> -		return ret;
> -
> -	dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%c) probed\n",
> +	dev_info(&pdev->dev, "AXI ADC IP core (%d.%.2d.%d) probed\n",

This should also be in that separate patch fixing up this formatting.

>  		 ADI_AXI_PCORE_VER_MAJOR(ver),
>  		 ADI_AXI_PCORE_VER_MINOR(ver),
>  		 ADI_AXI_PCORE_VER_PATCH(ver));
> @@ -428,6 +229,8 @@ static int adi_axi_adc_probe(struct platform_device *pdev)
>  	return 0;
>  }





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux