[PATCH] dt-bindings: iio: afe: voltage-divider: Add io-channel-cells

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add #io-channel-cells expected by driver. i.e., below is the message
seen in kernel log:
OF: /iio-hwmon: could not get #io-channel-cells for /voltage_divider1

TEST=Run below command & make sure there is no error:
make DT_CHECKER_FLAGS=-m dt_binding_check -j1

Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index dddf97b50549..b4b5489ad98e 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -39,6 +39,9 @@ properties:
     description: |
       Channel node of a voltage io-channel.
 
+  '#io-channel-cells':
+    const: 1
+
   output-ohms:
     description:
       Resistance Rout over which the output voltage is measured. See full-ohms.

base-commit: ecb1b8288dc7ccbdcb3b9df005fa1c0e0c0388a7
-- 
2.42.0





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux