On Mon, 14 Aug 2023 18:43:49 +0200
Angel Iglesias <ang.iglesiasg@xxxxxxxxx> wrote:
> On Mon, 2023-08-14 at 06:57 +0000, Biju Das wrote:
> > Hi Angel Iglesias,
> >
> >
> > > Subject: Re: [PATCH v2 2/3] iio: pressure: bmp280: Use i2c_get_match_data
> > >
> > > On Sun, 2023-08-13 at 21:03 +0200, Angel Iglesias wrote:
> > > > Replaces device_get_match_data() and fallback match_id logic by new
> > > > unified helper function i2c_get_match_data().
> > > >
> > > > Signed-off-by: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
> > > >
> > > > diff --git a/drivers/iio/pressure/bmp280-i2c.c
> > > > b/drivers/iio/pressure/bmp280- i2c.c index 693eb1975fdc..34e3bc758493
> > > > 100644
> > > > --- a/drivers/iio/pressure/bmp280-i2c.c
> > > > +++ b/drivers/iio/pressure/bmp280-i2c.c
> > > > @@ -11,9 +11,7 @@ static int bmp280_i2c_probe(struct i2c_client
> > > > *client)
> > > > const struct bmp280_chip_info *chip_info;
> > > > struct regmap *regmap;
> > > >
> > > > - chip_info = device_get_match_data(&client->dev);
> > > > - if (!chip_info)
> > > > - chip_info = (const struct bmp280_chip_info *)
> > > > id->driver_data;
> > > > + chip_info = i2c_get_match_data(client);
> > > >
> > > > regmap = devm_regmap_init_i2c(client,
> > > > chip_info->regmap_config);
> > > > if (IS_ERR(regmap)) {
> > >
> > > Hi,
> > >
> > > I noticed I submitted this change that was also submitted by Biju Das on
> > > another
> > > patch:
> >
> > > Should I drop this patch from the series?
> >
> > I think it is ok. Andy is suggesting to use unified table for SPI/I2C
> >
> > Is it something do able and testable in your environment? see [1],
> > If yes, please create another patch for using unified table for both i2c and
> > spi.
>
> I have around a BMP390 with the SPI pins available to test it out. In the case
> of the bmp280 we could unify the of_match table as they're almost the same. In
> the case of the spi_device_id and i2c_device_id tables, as they're different
> structs I'm not sure if they can be unified.
>
> Regarding Andy's comment, I think he's referring to the duplicated chip infos.
> In the case of the bmp280, the chip_infos are defined on the common driver code
> and used for both SPI and I2C match tables.
Hi,
I'm loosing track of where we are with this driver as multiple people are
working on it.
Angel, as most of the work is yours, please could you manage the flow of patches
for this one so I get series with clear statement of what they are dependent on.
Thanks,
Jonathan
>
> >
> > https://lore.kernel.org/linux-renesas-soc/CAHp75VeX+T=hAN+PgtHTdv4b6UtDVgveUUww1b1kuOngzDinFw@xxxxxxxxxxxxxx/T/#t
> >
> > Cheers,
> > Biju
>
> Kind regards,
> Angel
>
