Re: [PATCH 07/10] arm64: dts: st: add RIFSC as a domain controller for STM32MP25x boards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alex,

On 7/6/23 11:30, Gatien CHEVALLIER wrote:
Hi Alex,

On 7/6/23 11:25, Alexandre TORGUE wrote:
Hi Gatien

On 7/5/23 19:27, Gatien Chevallier wrote:
RIFSC is a firewall controller. Change its compatible so that is matches
the documentation and reference RIFSC as a feature-domain-controller.

Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/st/stm32mp251.dtsi | 5 ++++-
  1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 5268a4321841..62101084cab8 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -106,17 +106,20 @@ soc@0 {
          ranges = <0x0 0x0 0x0 0x80000000>;
          rifsc: rifsc-bus@42080000 {
-            compatible = "simple-bus";
+            compatible = "st,stm32mp25-rifsc";

You could keep "simple-bus" compatible (in second position). In case of the RIFSC is not probed, the platform will be able to boot. If you agree you can use the same for ETZPC.

Cheers
Alex

Sure, good point.

I'll change that in V2

Best regards,
Gatien

Actually, it would be a bad idea to keep "simple-bus" as a compatible.

Practical example:
1) Firewall controller forbids a device probe by marking the device's
node as populated (OF_POPULATED flag).
2) The simple-bus, which is simple, populates all the devices
from the device tree data, overriding what the firewall bus has done.
3)=>Forbidden device's driver will be probed.

I think it's best to keep one compatible. If someone wants these drivers
as external modules, then it'll be best to handle this differently.
I'll resubmit with a single compatible for V2, please do not
hesitate to comment on the V2 if you're not okay with this.

Best regards,
Gatien


              reg = <0x42080000 0x1000>;
              #address-cells = <1>;
              #size-cells = <1>;
              ranges;
+            feature-domain-controller;
+            #feature-domain-cells = <1>;
              usart2: serial@400e0000 {
                  compatible = "st,stm32h7-uart";
                  reg = <0x400e0000 0x400>;
                  interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
                  clocks = <&ck_flexgen_08>;
+                feature-domains = <&rifsc 32>;
                  status = "disabled";
              };
          };




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux