On 04/05/2023 09.28, Nuno Sá wrote: > Hi Rasmus, > > So, I'm not really that familiar with this part and, at this stage, I'm being > lazy to check the datasheet. Well, the data sheet is not particularly helpful here, which is why I ended up with this mess. > My concern is about breaking some other users... I highly doubt there are users yet (other than my customer); this binding+driver implementation only just landed. > So, does it make any sense for having drive-strength-microamp in a non digital > input at all? That's the problem with the data sheet, it doesn't really say that the DIN_SINK register has any effect whatsoever when the channel function is set to something other than digital input (either flavor). Perhaps it does hint that setting it to something non-zero is probably not a good idea, because DIN_SINK is automatically set to 0 whenever the channel function is set/changed, so one needs a good reason to change DIN_SINK afterwards. We just experimentally found out that when we added the DIN_SINK to fix the digital input functions, when we got around to testing the resistance measurement function that ended up broken due to the non-zero DIN_SINK. > Can anyone have a working device by specifying that dt parameter > on a non digital channel (or expect something from having that parameter set)? > Or the only effect is to actually have some functions misbehaving? The data sheet doesn't say that the DIN_SINK should have any effect for other functions, so I'm pretty sure it's only the latter: some functions misbehave. > On the driver side, if it's never right to have > these settings together, then the patch is valid since if someone has this, his > configuration is broken anyways (maybe that's also a valid point for the > bindings)... Yes, I do believe that it's a broken description (whether or not the bindings specify that), and drivers don't need to go out of their way to validate or fixup such brokenness. But in this particular case, there's really no extra burden on the driver to not put garbage in DIN_SINK when a not-digital-input function has been chosen (the patch is a two-liner with 'git show -w'). Rasmus