[PATCH 12/17] staging: iio: cdc: ad7746: Switch from _offset to _inputoffset for differential channels.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

As this offset is applied equally to both lines of the differential
pair, _ofset should not be used. Use the new ABI _inputoffset instead
to avoid userspace software applying this value when calculating
real value = (_raw + _offset) * _scale

Also add a comment to explain why an offset of 0x800000 is applied
within the driver rather than exposed to userspace.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
---
 drivers/staging/iio/cdc/ad7746.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 0dc5630d0655..46cdddab495f 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -205,7 +205,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.channel = 0,
 		.channel2 = 2,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_INPUTOFFSET),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
 		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = CIN1_DIFF,
@@ -227,7 +227,7 @@ static const struct iio_chan_spec ad7746_channels[] = {
 		.channel = 1,
 		.channel2 = 3,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
-		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_OFFSET),
+		BIT(IIO_CHAN_INFO_CALIBSCALE) | BIT(IIO_CHAN_INFO_INPUTOFFSET),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBBIAS) |
 		BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.address = CIN2_DIFF,
@@ -504,6 +504,7 @@ static int ad7746_write_raw(struct iio_dev *indio_dev,
 
 		return 0;
 	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_INPUTOFFSET:
 		if (val < 0 || val > 43008000) /* 21pF */
 			return -EINVAL;
 
@@ -579,6 +580,10 @@ static int ad7746_read_channel(struct iio_dev *indio_dev,
 	if (ret < 0)
 		return ret;
 
+	/*
+	 * Offset applied internally becaue the _offset userspace interface is
+	 * needed for the CAP DACs which apply a controllable offset.
+	 */
 	*val = get_unaligned_be24(data) - 0x800000;
 
 	return 0;
@@ -635,6 +640,7 @@ static int ad7746_read_raw(struct iio_dev *indio_dev,
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_OFFSET:
+	case IIO_CHAN_INFO_INPUTOFFSET:
 		*val = FIELD_GET(AD7746_CAPDAC_DACP_MASK,
 				 chip->capdac[chan->channel][chan->differential]) * 338646;
 
-- 
2.35.3




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux