From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> This started out as an experiment with Vincent Whitchurch's roadtest testing framework [1] and that worked well so I carried on cleaning up the driver. Mostly this is standard tidy up, move to new interfaces, then move the driver out of staging, but there are a few other things in here. 1) Precision improvement for IIO_VAL_FRACTIONAL_LOG2. The ad7746 is a 24 bit sensor and this highlighted that 9 decimal places wasn't enough to keep the error introduced by _raw * _scale from growing too large over the whole range (I couldn't write a sensible test for it). So I've proposed increasing the precision of the calculation used to provide the sysfs attributes with this value type and printing a few more decimal places (12). 2) _inputoffset ABI addition. This driver had an odd use of _offset for the case of differential channels that applied the offset to both of the differential pair (hence usespace shouldn't not apply it when converting to the base units. That isn't inline with the existing documentation for _offset and it wasn't clear to me that it made sense at all. To avoid confusion I've added this new ABI (_inputoffset) for t 3) roadtest file - note this is not a complete test set for the driver and mainly focused on the main channel reads and places I thought I might have broken things whilst working on the driver. My conclusion on roadtest - Very useful indeed. I'd encourage others to consider developing some basic sanity tests for drivers they are working on. Hopefully my python code isn't too hideous to understand at least! Vincent, it might be worth thinking about some generic code to handle the 'variants' on correct ABI like I introduce here because I switched from a shared by type scale to an individual one per channel for the voltages. Both were ABI compliant so that sort of change is fine most of the time though we have to be careful with it. All comments welcome. Note there may be changes that make more sense to do after moving this out of staging as long as there are no ABI changes involved etc. Feel free to highlight those sorts of changes as well as anything more significant. [1] https://lore.kernel.org/all/20220311162445.346685-9-vincent.whitchurch@xxxxxxxx/ Jonathan Cameron (17): iio: core: Increase precision of IIO_VAL_FRACTIONAL_LOG2 iio: ABI: Fix wrong format of differential capacitance channel ABI. staging: iio: cdc: ad7746: Use explicit be24 handling. staging: iio: cdc: ad7746: Push handling of supply voltage scale to userspace. staging: iio: cdc: ad7746: Use local buffer for multi byte reads. staging: iio: cdc: ad7746: Factor out ad7746_read_channel() staging: iio: cdc: ad7764: Push locking down into case statements in read/write_raw staging: iio: cdc: ad7746: Break up use of chan->address and use FIELD_PREP etc staging: iio: cdc: ad7746: Drop usused i2c_set_clientdata() staging: iio: cdc: ad7746: Use _raw and _scale for temperature channels. iio: core: Introduce _inputoffset for differential channels staging: iio: cdc: ad7746: Switch from _offset to _inputoffset for differential channels. staging: iio: cdc: ad7746: Use read_avail() rather than opencoding. staging: iio: ad7746: White space cleanup iio: cdc: ad7746: Add device specific ABI documentation. iio: cdc: ad7746: Move driver out of staging. RFC: iio: cdc: ad7746: Add roadtest Documentation/ABI/testing/sysfs-bus-iio | 15 +- .../ABI/testing/sysfs-bus-iio-cdc-ad7746 | 11 + drivers/iio/cdc/Kconfig | 10 + drivers/iio/cdc/Makefile | 1 + drivers/iio/cdc/ad7746.c | 818 ++++++++++++++++++ drivers/iio/industrialio-core.c | 24 +- drivers/staging/iio/cdc/ad7746.c | 767 ---------------- include/linux/iio/types.h | 1 + .../roadtest/tests/iio/cdc/__init__.py | 0 .../roadtest/roadtest/tests/iio/cdc/config | 1 + .../roadtest/tests/iio/cdc/test_ad7746.py | 323 +++++++ 11 files changed, 1195 insertions(+), 776 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-cdc-ad7746 create mode 100644 drivers/iio/cdc/ad7746.c delete mode 100644 drivers/staging/iio/cdc/ad7746.c create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/__init__.py create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/config create mode 100644 tools/testing/roadtest/roadtest/tests/iio/cdc/test_ad7746.py -- 2.35.3
