Before adding new Semtech sensors, move common logic to all Semtech SAR
sensor in its own file:
- interface with IIO subsystem,
- interrupt management,
- channel access conrol,
- event processing.
The change adds a bidirectional interface between sx93xx and sx_common.
The change is quite mechanical, as the impacted functions are moved
and renamed.
Signed-off-by: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
---
Changes in v4:
- Fix credit in sx_common.c
- Use chip_info instead of info in common data structure.
- Remove unnecessary includes in sx_common.c
- Remove WHOAMI register values from sx_common.h
- Fix kerneldoc comments.
Changes in v3:
- No line change in Makefile
- Leave interrupt.h include, needed at suspend/resume.
Changes in v2:
- Add Kconfig/Makefile that were in the wrong patch
- Define a better interface between common code and driver code
- Move back read_avail() to driver code:
As it now contains frequency table, it will differ from sensor to
sensor.
- Check whoami and set driver name back in the driver code.
- Use a common probe routine.
- Fix kernel doc comments.
drivers/iio/proximity/Kconfig | 4 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/sx9310.c | 675 +++++-------------------------
drivers/iio/proximity/sx_common.c | 568 +++++++++++++++++++++++++
drivers/iio/proximity/sx_common.h | 155 +++++++
5 files changed, 826 insertions(+), 577 deletions(-)
create mode 100644 drivers/iio/proximity/sx_common.c
create mode 100644 drivers/iio/proximity/sx_common.h
diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
index 7c7203ca3ac638..e88fc373c2c903 100644
--- a/drivers/iio/proximity/Kconfig
+++ b/drivers/iio/proximity/Kconfig
@@ -112,11 +112,15 @@ config SRF04
To compile this driver as a module, choose M here: the
module will be called srf04.
+config SX_COMMON
+ tristate
+
config SX9310
tristate "SX9310/SX9311 Semtech proximity sensor"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
+ select SX_COMMON
depends on I2C
help
Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
index cbdac09433eb51..2577fbce4144e5 100644
--- a/drivers/iio/proximity/Makefile
+++ b/drivers/iio/proximity/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_RFD77402) += rfd77402.o
obj-$(CONFIG_SRF04) += srf04.o
obj-$(CONFIG_SRF08) += srf08.o
obj-$(CONFIG_SX9310) += sx9310.o
+obj-$(CONFIG_SX_COMMON) += sx_common.o
obj-$(CONFIG_SX9500) += sx9500.o
obj-$(CONFIG_VCNL3020) += vcnl3020.o
obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index 1647268b6471f1..6376ffe17726f6 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -14,6 +14,7 @@
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/i2c.h>
+#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/log2.h>
@@ -22,19 +23,16 @@
#include <linux/pm.h>
#include <linux/property.h>
#include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
#include <linux/slab.h>
-#include <linux/iio/buffer.h>
#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
-#include <linux/iio/trigger.h>
-#include <linux/iio/triggered_buffer.h>
-#include <linux/iio/trigger_consumer.h>
+
+#include "sx_common.h"
/* Register definitions. */
-#define SX9310_REG_IRQ_SRC 0x00
+#define SX9310_REG_IRQ_SRC SX_COMMON_REG_IRQ_SRC
#define SX9310_REG_STAT0 0x01
#define SX9310_REG_STAT1 0x02
#define SX9310_REG_STAT1_COMPSTAT_MASK GENMASK(3, 0)
@@ -135,83 +133,36 @@
#define SX9310_WHOAMI_VALUE 0x01
#define SX9311_WHOAMI_VALUE 0x02
#define SX9310_REG_RESET 0x7f
-#define SX9310_SOFT_RESET 0xde
/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
#define SX9310_NUM_CHANNELS 4
-static_assert(SX9310_NUM_CHANNELS < BITS_PER_LONG);
-
-struct sx9310_data {
- /* Serialize access to registers and channel configuration */
- struct mutex mutex;
- struct i2c_client *client;
- struct iio_trigger *trig;
- struct regmap *regmap;
- struct regulator_bulk_data supplies[2];
- /*
- * Last reading of the proximity status for each channel.
- * We only send an event to user space when this changes.
- */
- unsigned long chan_prox_stat;
- bool trigger_enabled;
- /* Ensure correct alignment of timestamp when present. */
- struct {
- __be16 channels[SX9310_NUM_CHANNELS];
- s64 ts __aligned(8);
- } buffer;
- /* Remember enabled channels and sample rate during suspend. */
- unsigned int suspend_ctrl0;
- struct completion completion;
- unsigned long chan_read;
- unsigned long chan_event;
- unsigned int whoami;
-};
-
-static const struct iio_event_spec sx9310_events[] = {
- {
- .type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_RISING,
- .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
- },
- {
- .type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_FALLING,
- .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
- },
- {
- .type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_EITHER,
- .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
- BIT(IIO_EV_INFO_HYSTERESIS) |
- BIT(IIO_EV_INFO_VALUE),
- },
-};
-
-#define SX9310_NAMED_CHANNEL(idx, name) \
- { \
- .type = IIO_PROXIMITY, \
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
- BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
- .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
- .info_mask_separate_available = \
- BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
- .info_mask_shared_by_all_available = \
- BIT(IIO_CHAN_INFO_SAMP_FREQ), \
- .indexed = 1, \
- .channel = idx, \
- .extend_name = name, \
- .address = SX9310_REG_DIFF_MSB, \
- .event_spec = sx9310_events, \
- .num_event_specs = ARRAY_SIZE(sx9310_events), \
- .scan_index = idx, \
- .scan_type = { \
- .sign = 's', \
- .realbits = 12, \
- .storagebits = 16, \
- .endianness = IIO_BE, \
- }, \
- }
+static_assert(SX9310_NUM_CHANNELS <= SX_COMMON_MAX_NUM_CHANNELS);
+
+#define SX9310_NAMED_CHANNEL(idx, name) \
+{ \
+ .type = IIO_PROXIMITY, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_separate_available = \
+ BIT(IIO_CHAN_INFO_HARDWAREGAIN), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .indexed = 1, \
+ .channel = idx, \
+ .extend_name = name, \
+ .address = SX9310_REG_DIFF_MSB, \
+ .event_spec = sx_common_events, \
+ .num_event_specs = ARRAY_SIZE(sx_common_events), \
+ .scan_index = idx, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 12, \
+ .storagebits = 16, \
+ .endianness = IIO_BE, \
+ }, \
+}
#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
static const struct iio_chan_spec sx9310_channels[] = {
@@ -306,64 +257,7 @@ static const struct regmap_config sx9310_regmap_config = {
.volatile_table = &sx9310_volatile_regs,
};
-static int sx9310_update_chan_en(struct sx9310_data *data,
- unsigned long chan_read,
- unsigned long chan_event)
-{
- int ret;
- unsigned long channels = chan_read | chan_event;
-
- if ((data->chan_read | data->chan_event) != channels) {
- ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
- SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
- channels);
- if (ret)
- return ret;
- }
- data->chan_read = chan_read;
- data->chan_event = chan_event;
- return 0;
-}
-
-static int sx9310_get_read_channel(struct sx9310_data *data, int channel)
-{
- return sx9310_update_chan_en(data, data->chan_read | BIT(channel),
- data->chan_event);
-}
-
-static int sx9310_put_read_channel(struct sx9310_data *data, int channel)
-{
- return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel),
- data->chan_event);
-}
-
-static int sx9310_get_event_channel(struct sx9310_data *data, int channel)
-{
- return sx9310_update_chan_en(data, data->chan_read,
- data->chan_event | BIT(channel));
-}
-
-static int sx9310_put_event_channel(struct sx9310_data *data, int channel)
-{
- return sx9310_update_chan_en(data, data->chan_read,
- data->chan_event & ~BIT(channel));
-}
-
-static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq)
-{
- if (!data->client->irq)
- return 0;
- return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq);
-}
-
-static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq)
-{
- if (!data->client->irq)
- return 0;
- return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0);
-}
-
-static int sx9310_read_prox_data(struct sx9310_data *data,
+static int sx9310_read_prox_data(struct sx_common_data *data,
const struct iio_chan_spec *chan, __be16 *val)
{
int ret;
@@ -379,7 +273,7 @@ static int sx9310_read_prox_data(struct sx9310_data *data,
* If we have no interrupt support, we have to wait for a scan period
* after enabling a channel to get a result.
*/
-static int sx9310_wait_for_sample(struct sx9310_data *data)
+static int sx9310_wait_for_sample(struct sx_common_data *data)
{
int ret;
unsigned int val;
@@ -395,66 +289,7 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
return 0;
}
-static int sx9310_read_proximity(struct sx9310_data *data,
- const struct iio_chan_spec *chan, int *val)
-{
- int ret;
- __be16 rawval;
-
- mutex_lock(&data->mutex);
-
- ret = sx9310_get_read_channel(data, chan->channel);
- if (ret)
- goto out;
-
- ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
- if (ret)
- goto out_put_channel;
-
- mutex_unlock(&data->mutex);
-
- if (data->client->irq) {
- ret = wait_for_completion_interruptible(&data->completion);
- reinit_completion(&data->completion);
- } else {
- ret = sx9310_wait_for_sample(data);
- }
-
- mutex_lock(&data->mutex);
-
- if (ret)
- goto out_disable_irq;
-
- ret = sx9310_read_prox_data(data, chan, &rawval);
- if (ret)
- goto out_disable_irq;
-
- *val = sign_extend32(be16_to_cpu(rawval),
- chan->address == SX9310_REG_DIFF_MSB ? 11 : 15);
-
- ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
- if (ret)
- goto out_put_channel;
-
- ret = sx9310_put_read_channel(data, chan->channel);
- if (ret)
- goto out;
-
- mutex_unlock(&data->mutex);
-
- return IIO_VAL_INT;
-
-out_disable_irq:
- sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
-out_put_channel:
- sx9310_put_read_channel(data, chan->channel);
-out:
- mutex_unlock(&data->mutex);
-
- return ret;
-}
-
-static int sx9310_read_gain(struct sx9310_data *data,
+static int sx9310_read_gain(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int regval, gain;
@@ -482,7 +317,7 @@ static int sx9310_read_gain(struct sx9310_data *data,
return IIO_VAL_INT;
}
-static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
+static int sx9310_read_samp_freq(struct sx_common_data *data, int *val, int *val2)
{
unsigned int regval;
int ret;
@@ -502,7 +337,7 @@ static int sx9310_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int *val,
int *val2, long mask)
{
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
int ret;
if (chan->type != IIO_PROXIMITY)
@@ -514,7 +349,7 @@ static int sx9310_read_raw(struct iio_dev *indio_dev,
if (ret)
return ret;
- ret = sx9310_read_proximity(data, chan, val);
+ ret = sx_common_read_proximity(data, chan, val);
iio_device_release_direct_mode(indio_dev);
return ret;
case IIO_CHAN_INFO_HARDWAREGAIN:
@@ -577,7 +412,7 @@ static int sx9310_get_thresh_reg(unsigned int channel)
return -EINVAL;
}
-static int sx9310_read_thresh(struct sx9310_data *data,
+static int sx9310_read_thresh(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int reg;
@@ -600,7 +435,7 @@ static int sx9310_read_thresh(struct sx9310_data *data,
return IIO_VAL_INT;
}
-static int sx9310_read_hysteresis(struct sx9310_data *data,
+static int sx9310_read_hysteresis(struct sx_common_data *data,
const struct iio_chan_spec *chan, int *val)
{
unsigned int regval, pthresh;
@@ -624,7 +459,7 @@ static int sx9310_read_hysteresis(struct sx9310_data *data,
return IIO_VAL_INT;
}
-static int sx9310_read_far_debounce(struct sx9310_data *data, int *val)
+static int sx9310_read_far_debounce(struct sx_common_data *data, int *val)
{
unsigned int regval;
int ret;
@@ -642,7 +477,7 @@ static int sx9310_read_far_debounce(struct sx9310_data *data, int *val)
return IIO_VAL_INT;
}
-static int sx9310_read_close_debounce(struct sx9310_data *data, int *val)
+static int sx9310_read_close_debounce(struct sx_common_data *data, int *val)
{
unsigned int regval;
int ret;
@@ -666,7 +501,7 @@ static int sx9310_read_event_val(struct iio_dev *indio_dev,
enum iio_event_direction dir,
enum iio_event_info info, int *val, int *val2)
{
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
@@ -690,7 +525,7 @@ static int sx9310_read_event_val(struct iio_dev *indio_dev,
}
}
-static int sx9310_write_thresh(struct sx9310_data *data,
+static int sx9310_write_thresh(struct sx_common_data *data,
const struct iio_chan_spec *chan, int val)
{
unsigned int reg;
@@ -720,7 +555,7 @@ static int sx9310_write_thresh(struct sx9310_data *data,
return ret;
}
-static int sx9310_write_hysteresis(struct sx9310_data *data,
+static int sx9310_write_hysteresis(struct sx_common_data *data,
const struct iio_chan_spec *chan, int _val)
{
unsigned int hyst, val = _val;
@@ -750,7 +585,7 @@ static int sx9310_write_hysteresis(struct sx9310_data *data,
return ret;
}
-static int sx9310_write_far_debounce(struct sx9310_data *data, int val)
+static int sx9310_write_far_debounce(struct sx_common_data *data, int val)
{
int ret;
unsigned int regval;
@@ -771,7 +606,7 @@ static int sx9310_write_far_debounce(struct sx9310_data *data, int val)
return ret;
}
-static int sx9310_write_close_debounce(struct sx9310_data *data, int val)
+static int sx9310_write_close_debounce(struct sx_common_data *data, int val)
{
int ret;
unsigned int regval;
@@ -798,7 +633,7 @@ static int sx9310_write_event_val(struct iio_dev *indio_dev,
enum iio_event_direction dir,
enum iio_event_info info, int val, int val2)
{
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
@@ -822,7 +657,7 @@ static int sx9310_write_event_val(struct iio_dev *indio_dev,
}
}
-static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
+static int sx9310_set_samp_freq(struct sx_common_data *data, int val, int val2)
{
int i, ret;
@@ -846,8 +681,8 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
return ret;
}
-static int sx9310_write_gain(struct sx9310_data *data,
- const struct iio_chan_spec *chan, int val)
+static int sx9310_write_gain(struct sx_common_data *data,
+ const struct iio_chan_spec *chan, int val)
{
unsigned int gain, mask;
int ret;
@@ -881,7 +716,7 @@ static int sx9310_write_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int val, int val2,
long mask)
{
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
if (chan->type != IIO_PROXIMITY)
return -EINVAL;
@@ -896,238 +731,7 @@ static int sx9310_write_raw(struct iio_dev *indio_dev,
return -EINVAL;
}
-static irqreturn_t sx9310_irq_handler(int irq, void *private)
-{
- struct iio_dev *indio_dev = private;
- struct sx9310_data *data = iio_priv(indio_dev);
-
- if (data->trigger_enabled)
- iio_trigger_poll(data->trig);
-
- /*
- * Even if no event is enabled, we need to wake the thread to clear the
- * interrupt state by reading SX9310_REG_IRQ_SRC.
- * It is not possible to do that here because regmap_read takes a mutex.
- */
- return IRQ_WAKE_THREAD;
-}
-
-static void sx9310_push_events(struct iio_dev *indio_dev)
-{
- int ret;
- unsigned int val, chan;
- struct sx9310_data *data = iio_priv(indio_dev);
- s64 timestamp = iio_get_time_ns(indio_dev);
- unsigned long prox_changed;
-
- /* Read proximity state on all channels */
- ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
- if (ret) {
- dev_err(&data->client->dev, "i2c transfer error in irq\n");
- return;
- }
-
- /*
- * Only iterate over channels with changes on proximity status that have
- * events enabled.
- */
- prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
-
- for_each_set_bit(chan, &prox_changed, SX9310_NUM_CHANNELS) {
- int dir;
- u64 ev;
-
- dir = (val & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
- ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
- IIO_EV_TYPE_THRESH, dir);
-
- iio_push_event(indio_dev, ev, timestamp);
- }
- data->chan_prox_stat = val;
-}
-
-static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
-{
- struct iio_dev *indio_dev = private;
- struct sx9310_data *data = iio_priv(indio_dev);
- int ret;
- unsigned int val;
-
- mutex_lock(&data->mutex);
-
- ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
- if (ret) {
- dev_err(&data->client->dev, "i2c transfer error in irq\n");
- goto out;
- }
-
- if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ))
- sx9310_push_events(indio_dev);
-
- if (val & SX9310_CONVDONE_IRQ)
- complete(&data->completion);
-
-out:
- mutex_unlock(&data->mutex);
-
- return IRQ_HANDLED;
-}
-
-static int sx9310_read_event_config(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir)
-{
- struct sx9310_data *data = iio_priv(indio_dev);
-
- return !!(data->chan_event & BIT(chan->channel));
-}
-
-static int sx9310_write_event_config(struct iio_dev *indio_dev,
- const struct iio_chan_spec *chan,
- enum iio_event_type type,
- enum iio_event_direction dir, int state)
-{
- struct sx9310_data *data = iio_priv(indio_dev);
- unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ;
- int ret;
-
- /* If the state hasn't changed, there's nothing to do. */
- if (!!(data->chan_event & BIT(chan->channel)) == state)
- return 0;
-
- mutex_lock(&data->mutex);
- if (state) {
- ret = sx9310_get_event_channel(data, chan->channel);
- if (ret)
- goto out_unlock;
- if (!(data->chan_event & ~BIT(chan->channel))) {
- ret = sx9310_enable_irq(data, eventirq);
- if (ret)
- sx9310_put_event_channel(data, chan->channel);
- }
- } else {
- ret = sx9310_put_event_channel(data, chan->channel);
- if (ret)
- goto out_unlock;
- if (!data->chan_event) {
- ret = sx9310_disable_irq(data, eventirq);
- if (ret)
- sx9310_get_event_channel(data, chan->channel);
- }
- }
-
-out_unlock:
- mutex_unlock(&data->mutex);
- return ret;
-}
-
-static const struct iio_info sx9310_info = {
- .read_raw = sx9310_read_raw,
- .read_avail = sx9310_read_avail,
- .read_event_value = sx9310_read_event_val,
- .write_event_value = sx9310_write_event_val,
- .write_raw = sx9310_write_raw,
- .read_event_config = sx9310_read_event_config,
- .write_event_config = sx9310_write_event_config,
-};
-
-static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
-{
- struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
- struct sx9310_data *data = iio_priv(indio_dev);
- int ret = 0;
-
- mutex_lock(&data->mutex);
-
- if (state)
- ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
- else if (!data->chan_read)
- ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
- if (ret)
- goto out;
-
- data->trigger_enabled = state;
-
-out:
- mutex_unlock(&data->mutex);
-
- return ret;
-}
-
-static const struct iio_trigger_ops sx9310_trigger_ops = {
- .set_trigger_state = sx9310_set_trigger_state,
-};
-
-static irqreturn_t sx9310_trigger_handler(int irq, void *private)
-{
- struct iio_poll_func *pf = private;
- struct iio_dev *indio_dev = pf->indio_dev;
- struct sx9310_data *data = iio_priv(indio_dev);
- __be16 val;
- int bit, ret, i = 0;
-
- mutex_lock(&data->mutex);
-
- for_each_set_bit(bit, indio_dev->active_scan_mask,
- indio_dev->masklength) {
- ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
- &val);
- if (ret)
- goto out;
-
- data->buffer.channels[i++] = val;
- }
-
- iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
- pf->timestamp);
-
-out:
- mutex_unlock(&data->mutex);
-
- iio_trigger_notify_done(indio_dev->trig);
-
- return IRQ_HANDLED;
-}
-
-static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
-{
- struct sx9310_data *data = iio_priv(indio_dev);
- unsigned long channels = 0;
- int bit, ret;
-
- mutex_lock(&data->mutex);
- for_each_set_bit(bit, indio_dev->active_scan_mask,
- indio_dev->masklength)
- __set_bit(indio_dev->channels[bit].channel, &channels);
-
- ret = sx9310_update_chan_en(data, channels, data->chan_event);
- mutex_unlock(&data->mutex);
- return ret;
-}
-
-static int sx9310_buffer_postdisable(struct iio_dev *indio_dev)
-{
- struct sx9310_data *data = iio_priv(indio_dev);
- int ret;
-
- mutex_lock(&data->mutex);
- ret = sx9310_update_chan_en(data, 0, data->chan_event);
- mutex_unlock(&data->mutex);
- return ret;
-}
-
-static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = {
- .preenable = sx9310_buffer_preenable,
- .postdisable = sx9310_buffer_postdisable,
-};
-
-struct sx9310_reg_default {
- u8 reg;
- u8 def;
-};
-
-static const struct sx9310_reg_default sx9310_default_regs[] = {
+static const struct sx_common_reg_default sx9310_default_regs[] = {
{ SX9310_REG_IRQ_MSK, 0x00 },
{ SX9310_REG_IRQ_FUNC, 0x00 },
/*
@@ -1172,7 +776,7 @@ static const struct sx9310_reg_default sx9310_default_regs[] = {
/* Activate all channels and perform an initial compensation. */
static int sx9310_init_compensation(struct iio_dev *indio_dev)
{
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
int ret;
unsigned int val;
unsigned int ctrl0;
@@ -1202,9 +806,9 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
return ret;
}
-static const struct sx9310_reg_default *
+static const struct sx_common_reg_default *
sx9310_get_default_reg(struct device *dev, int idx,
- struct sx9310_reg_default *reg_def)
+ struct sx_common_reg_default *reg_def)
{
u32 combined[SX9310_NUM_CHANNELS];
u32 start = 0, raw = 0, pos = 0;
@@ -1305,42 +909,20 @@ sx9310_get_default_reg(struct device *dev, int idx,
return reg_def;
}
-static int sx9310_init_device(struct iio_dev *indio_dev)
+static int sx9310_check_whoami(struct device *dev,
+ struct iio_dev *indio_dev)
{
- struct sx9310_data *data = iio_priv(indio_dev);
- struct sx9310_reg_default tmp;
- const struct sx9310_reg_default *initval;
+ struct sx_common_data *data = iio_priv(indio_dev);
+ unsigned int long ddata;
+ unsigned int whoami;
int ret;
- unsigned int i, val;
- ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
- if (ret)
- return ret;
-
- usleep_range(1000, 2000); /* power-up time is ~1ms. */
-
- /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
- ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
- if (ret)
+ ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &whoami);
+ if (ret) {
+ dev_err(dev, "error in reading WHOAMI register: %d", ret);
return ret;
-
- /* Program some sane defaults. */
- for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
- initval = sx9310_get_default_reg(&indio_dev->dev, i, &tmp);
- ret = regmap_write(data->regmap, initval->reg, initval->def);
- if (ret)
- return ret;
}
- return sx9310_init_compensation(indio_dev);
-}
-
-static int sx9310_set_indio_dev_name(struct device *dev,
- struct iio_dev *indio_dev,
- unsigned int whoami)
-{
- unsigned int long ddata;
-
ddata = (uintptr_t)device_get_match_data(dev);
if (ddata != whoami) {
dev_err(dev, "WHOAMI does not match device data: %u\n", whoami);
@@ -1362,108 +944,47 @@ static int sx9310_set_indio_dev_name(struct device *dev,
return 0;
}
-static void sx9310_regulator_disable(void *_data)
-{
- struct sx9310_data *data = _data;
+static const struct sx_common_chip_info sx9310_chip_info = {
+ .reg_stat = SX9310_REG_STAT0,
+ .reg_irq_msk = SX9310_REG_IRQ_MSK,
+ .reg_enable_chan = SX9310_REG_PROX_CTRL0,
+ .reg_reset = SX9310_REG_RESET,
+
+ .mask_enable_chan = SX9310_REG_STAT1_COMPSTAT_MASK,
+ .irq_msk_offset = 3,
+ .num_channels = SX9310_NUM_CHANNELS,
+ .num_default_regs = ARRAY_SIZE(sx9310_default_regs),
+
+ .ops = {
+ .read_prox_data = sx9310_read_prox_data,
+ .check_whoami = sx9310_check_whoami,
+ .init_compensation = sx9310_init_compensation,
+ .wait_for_sample = sx9310_wait_for_sample,
+ .get_default_reg = sx9310_get_default_reg,
+ },
- regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
-}
+ .iio_channels = sx9310_channels,
+ .num_iio_channels = ARRAY_SIZE(sx9310_channels),
+ .iio_info = {
+ .read_raw = sx9310_read_raw,
+ .read_avail = sx9310_read_avail,
+ .read_event_value = sx9310_read_event_val,
+ .write_event_value = sx9310_write_event_val,
+ .write_raw = sx9310_write_raw,
+ .read_event_config = sx_common_read_event_config,
+ .write_event_config = sx_common_write_event_config,
+ },
+};
static int sx9310_probe(struct i2c_client *client)
{
- int ret;
- struct device *dev = &client->dev;
- struct iio_dev *indio_dev;
- struct sx9310_data *data;
-
- indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
- if (!indio_dev)
- return -ENOMEM;
-
- data = iio_priv(indio_dev);
- data->client = client;
- data->supplies[0].supply = "vdd";
- data->supplies[1].supply = "svdd";
- mutex_init(&data->mutex);
- init_completion(&data->completion);
-
- data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
- if (IS_ERR(data->regmap))
- return PTR_ERR(data->regmap);
-
- ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
- data->supplies);
- if (ret)
- return ret;
-
- ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
- if (ret)
- return ret;
- /* Must wait for Tpor time after initial power up */
- usleep_range(1000, 1100);
-
- ret = devm_add_action_or_reset(dev, sx9310_regulator_disable, data);
- if (ret)
- return ret;
-
- ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
- if (ret) {
- dev_err(dev, "error in reading WHOAMI register: %d", ret);
- return ret;
- }
-
- ret = sx9310_set_indio_dev_name(dev, indio_dev, data->whoami);
- if (ret)
- return ret;
-
- ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
- indio_dev->channels = sx9310_channels;
- indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
- indio_dev->info = &sx9310_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
- i2c_set_clientdata(client, indio_dev);
-
- ret = sx9310_init_device(indio_dev);
- if (ret)
- return ret;
-
- if (client->irq) {
- ret = devm_request_threaded_irq(dev, client->irq,
- sx9310_irq_handler,
- sx9310_irq_thread_handler,
- IRQF_ONESHOT,
- "sx9310_event", indio_dev);
- if (ret)
- return ret;
-
- data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
- indio_dev->name,
- iio_device_id(indio_dev));
- if (!data->trig)
- return -ENOMEM;
-
- data->trig->ops = &sx9310_trigger_ops;
- iio_trigger_set_drvdata(data->trig, indio_dev);
-
- ret = devm_iio_trigger_register(dev, data->trig);
- if (ret)
- return ret;
- }
-
- ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
- iio_pollfunc_store_time,
- sx9310_trigger_handler,
- &sx9310_buffer_setup_ops);
- if (ret)
- return ret;
-
- return devm_iio_device_register(dev, indio_dev);
+ return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config);
}
static int __maybe_unused sx9310_suspend(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
u8 ctrl0;
int ret;
@@ -1471,11 +992,11 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
mutex_lock(&data->mutex);
ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
- &data->suspend_ctrl0);
+ &data->suspend_ctrl);
if (ret)
goto out;
- ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
+ ctrl0 = data->suspend_ctrl & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
if (ret)
goto out;
@@ -1490,7 +1011,7 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
static int __maybe_unused sx9310_resume(struct device *dev)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
- struct sx9310_data *data = iio_priv(indio_dev);
+ struct sx_common_data *data = iio_priv(indio_dev);
int ret;
mutex_lock(&data->mutex);
@@ -1499,7 +1020,7 @@ static int __maybe_unused sx9310_resume(struct device *dev)
goto out;
ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
- data->suspend_ctrl0);
+ data->suspend_ctrl);
out:
mutex_unlock(&data->mutex);
diff --git a/drivers/iio/proximity/sx_common.c b/drivers/iio/proximity/sx_common.c
new file mode 100644
index 00000000000000..fc2062a1d95c74
--- /dev/null
+++ b/drivers/iio/proximity/sx_common.c
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Common part of most Semtech SAR sensor.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "sx_common.h"
+
+/* All Semtech SAR sensor have IRQ bit in same order. */
+#define SX_COMMON_CONVDONE_IRQ BIT(0)
+#define SX_COMMON_FAR_IRQ BIT(2)
+#define SX_COMMON_CLOSE_IRQ BIT(3)
+
+const struct iio_event_spec sx_common_events[3] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+ },
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+ },
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+ BIT(IIO_EV_INFO_HYSTERESIS) |
+ BIT(IIO_EV_INFO_VALUE),
+ },
+};
+EXPORT_SYMBOL_GPL(sx_common_events);
+
+static irqreturn_t sx_common_irq_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sx_common_data *data = iio_priv(indio_dev);
+
+ if (data->trigger_enabled)
+ iio_trigger_poll(data->trig);
+
+ /*
+ * Even if no event is enabled, we need to wake the thread to clear the
+ * interrupt state by reading SX_COMMON_REG_IRQ_SRC.
+ * It is not possible to do that here because regmap_read takes a mutex.
+ */
+ return IRQ_WAKE_THREAD;
+}
+
+static void sx_common_push_events(struct iio_dev *indio_dev)
+{
+ int ret;
+ unsigned int val, chan;
+ struct sx_common_data *data = iio_priv(indio_dev);
+ s64 timestamp = iio_get_time_ns(indio_dev);
+ unsigned long prox_changed;
+
+ /* Read proximity state on all channels */
+ ret = regmap_read(data->regmap, data->chip_info->reg_stat, &val);
+ if (ret) {
+ dev_err(&data->client->dev, "i2c transfer error in irq\n");
+ return;
+ }
+
+ /*
+ * Only iterate over channels with changes on proximity status that have
+ * events enabled.
+ */
+ prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
+
+ for_each_set_bit(chan, &prox_changed, data->chip_info->num_channels) {
+ int dir;
+ u64 ev;
+
+ dir = (val & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+ ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+ IIO_EV_TYPE_THRESH, dir);
+
+ iio_push_event(indio_dev, ev, timestamp);
+ }
+ data->chan_prox_stat = val;
+}
+
+static int sx_common_enable_irq(struct sx_common_data *data, unsigned int irq)
+{
+ if (!data->client->irq)
+ return 0;
+ return regmap_update_bits(data->regmap, data->chip_info->reg_irq_msk,
+ irq << data->chip_info->irq_msk_offset,
+ irq << data->chip_info->irq_msk_offset);
+}
+
+static int sx_common_disable_irq(struct sx_common_data *data, unsigned int irq)
+{
+ if (!data->client->irq)
+ return 0;
+ return regmap_update_bits(data->regmap, data->chip_info->reg_irq_msk,
+ irq << data->chip_info->irq_msk_offset, 0);
+}
+
+static int sx_common_update_chan_en(struct sx_common_data *data,
+ unsigned long chan_read,
+ unsigned long chan_event)
+{
+ int ret;
+ unsigned long channels = chan_read | chan_event;
+
+ if ((data->chan_read | data->chan_event) != channels) {
+ ret = regmap_update_bits(data->regmap,
+ data->chip_info->reg_enable_chan,
+ data->chip_info->mask_enable_chan,
+ channels);
+ if (ret)
+ return ret;
+ }
+ data->chan_read = chan_read;
+ data->chan_event = chan_event;
+ return 0;
+}
+
+static int sx_common_get_read_channel(struct sx_common_data *data, int channel)
+{
+ return sx_common_update_chan_en(data, data->chan_read | BIT(channel),
+ data->chan_event);
+}
+
+static int sx_common_put_read_channel(struct sx_common_data *data, int channel)
+{
+ return sx_common_update_chan_en(data, data->chan_read & ~BIT(channel),
+ data->chan_event);
+}
+
+static int sx_common_get_event_channel(struct sx_common_data *data, int channel)
+{
+ return sx_common_update_chan_en(data, data->chan_read,
+ data->chan_event | BIT(channel));
+}
+
+static int sx_common_put_event_channel(struct sx_common_data *data, int channel)
+{
+ return sx_common_update_chan_en(data, data->chan_read,
+ data->chan_event & ~BIT(channel));
+}
+
+/**
+ * sx_common_read_proximity() - Read raw proximity value.
+ *
+ * @data: Internal data
+ * @chan: Channel to read
+ * @val: pointer to return read value.
+ *
+ * Request a conversion, wait for the sensor to be ready and
+ * return the raw proximity value.
+ */
+int sx_common_read_proximity(struct sx_common_data *data,
+ const struct iio_chan_spec *chan, int *val)
+{
+ int ret;
+ __be16 rawval;
+
+ mutex_lock(&data->mutex);
+
+ ret = sx_common_get_read_channel(data, chan->channel);
+ if (ret)
+ goto out;
+
+ ret = sx_common_enable_irq(data, SX_COMMON_CONVDONE_IRQ);
+ if (ret)
+ goto out_put_channel;
+
+ mutex_unlock(&data->mutex);
+
+ if (data->client->irq) {
+ ret = wait_for_completion_interruptible(&data->completion);
+ reinit_completion(&data->completion);
+ } else {
+ ret = data->chip_info->ops.wait_for_sample(data);
+ }
+
+ mutex_lock(&data->mutex);
+
+ if (ret)
+ goto out_disable_irq;
+
+ ret = data->chip_info->ops.read_prox_data(data, chan, &rawval);
+ if (ret)
+ goto out_disable_irq;
+
+ *val = sign_extend32(be16_to_cpu(rawval), chan->scan_type.realbits - 1);
+
+ ret = sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+ if (ret)
+ goto out_put_channel;
+
+ ret = sx_common_put_read_channel(data, chan->channel);
+ if (ret)
+ goto out;
+
+ mutex_unlock(&data->mutex);
+
+ return IIO_VAL_INT;
+
+out_disable_irq:
+ sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+out_put_channel:
+ sx_common_put_read_channel(data, chan->channel);
+out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sx_common_read_proximity);
+
+/**
+ * sx_common_read_event_config() - Configure event setting.
+ *
+ * @indio_dev: iio device object
+ * @chan: Channel to read
+ * @type: Type of event (unused)
+ * @dir: Direction of event (unused)
+ *
+ * return if the given channel is used for event gathering.
+ */
+int sx_common_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct sx_common_data *data = iio_priv(indio_dev);
+
+ return !!(data->chan_event & BIT(chan->channel));
+}
+EXPORT_SYMBOL_GPL(sx_common_read_event_config);
+
+/**
+ * sx_common_write_event_config() - Configure event setting.
+ *
+ * @indio_dev: iio device object
+ * @chan: Channel to enable
+ * @type: Type of event (unused)
+ * @dir: Direction of event (unused)
+ * @state: State of the event.
+ *
+ * Enable/Disable event on a given channel.
+ */
+int sx_common_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state)
+{
+ struct sx_common_data *data = iio_priv(indio_dev);
+ unsigned int eventirq = SX_COMMON_FAR_IRQ | SX_COMMON_CLOSE_IRQ;
+ int ret;
+
+ /* If the state hasn't changed, there's nothing to do. */
+ if (!!(data->chan_event & BIT(chan->channel)) == state)
+ return 0;
+
+ mutex_lock(&data->mutex);
+ if (state) {
+ ret = sx_common_get_event_channel(data, chan->channel);
+ if (ret)
+ goto out_unlock;
+ if (!(data->chan_event & ~BIT(chan->channel))) {
+ ret = sx_common_enable_irq(data, eventirq);
+ if (ret)
+ sx_common_put_event_channel(data, chan->channel);
+ }
+ } else {
+ ret = sx_common_put_event_channel(data, chan->channel);
+ if (ret)
+ goto out_unlock;
+ if (!data->chan_event) {
+ ret = sx_common_disable_irq(data, eventirq);
+ if (ret)
+ sx_common_get_event_channel(data, chan->channel);
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(sx_common_write_event_config);
+
+static int sx_common_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct sx_common_data *data = iio_priv(indio_dev);
+ int ret = 0;
+
+ mutex_lock(&data->mutex);
+
+ if (state)
+ ret = sx_common_enable_irq(data, SX_COMMON_CONVDONE_IRQ);
+ else if (!data->chan_read)
+ ret = sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+ if (ret)
+ goto out;
+
+ data->trigger_enabled = state;
+
+out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static const struct iio_trigger_ops sx_common_trigger_ops = {
+ .set_trigger_state = sx_common_set_trigger_state,
+};
+
+static irqreturn_t sx_common_irq_thread_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct sx_common_data *data = iio_priv(indio_dev);
+ int ret;
+ unsigned int val;
+
+ mutex_lock(&data->mutex);
+
+ ret = regmap_read(data->regmap, SX_COMMON_REG_IRQ_SRC, &val);
+ if (ret) {
+ dev_err(&data->client->dev, "i2c transfer error in irq\n");
+ goto out;
+ }
+
+ if (val & ((SX_COMMON_FAR_IRQ | SX_COMMON_CLOSE_IRQ) << data->chip_info->irq_msk_offset))
+ sx_common_push_events(indio_dev);
+
+ if (val & (SX_COMMON_CONVDONE_IRQ << data->chip_info->irq_msk_offset))
+ complete(&data->completion);
+
+out:
+ mutex_unlock(&data->mutex);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sx_common_trigger_handler(int irq, void *private)
+{
+ struct iio_poll_func *pf = private;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct sx_common_data *data = iio_priv(indio_dev);
+ __be16 val;
+ int bit, ret, i = 0;
+
+ mutex_lock(&data->mutex);
+
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength) {
+ ret = data->chip_info->ops.read_prox_data(data,
+ &indio_dev->channels[bit],
+ &val);
+ if (ret)
+ goto out;
+
+ data->buffer.channels[i++] = val;
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
+ pf->timestamp);
+
+out:
+ mutex_unlock(&data->mutex);
+
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static int sx_common_buffer_preenable(struct iio_dev *indio_dev)
+{
+ struct sx_common_data *data = iio_priv(indio_dev);
+ unsigned long channels = 0;
+ int bit, ret;
+
+ mutex_lock(&data->mutex);
+ for_each_set_bit(bit, indio_dev->active_scan_mask,
+ indio_dev->masklength)
+ __set_bit(indio_dev->channels[bit].channel, &channels);
+
+ ret = sx_common_update_chan_en(data, channels, data->chan_event);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static int sx_common_buffer_postdisable(struct iio_dev *indio_dev)
+{
+ struct sx_common_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = sx_common_update_chan_en(data, 0, data->chan_event);
+ mutex_unlock(&data->mutex);
+ return ret;
+}
+
+static const struct iio_buffer_setup_ops sx_common_buffer_setup_ops = {
+ .preenable = sx_common_buffer_preenable,
+ .postdisable = sx_common_buffer_postdisable,
+};
+
+static void sx_common_regulator_disable(void *_data)
+{
+ struct sx_common_data *data = _data;
+
+ regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+}
+
+#define SX_COMMON_SOFT_RESET 0xde
+
+static int sx_common_init_device(struct iio_dev *indio_dev)
+{
+ struct sx_common_data *data = iio_priv(indio_dev);
+ struct sx_common_reg_default tmp;
+ const struct sx_common_reg_default *initval;
+ int ret;
+ unsigned int i, val;
+
+ ret = regmap_write(data->regmap, data->chip_info->reg_reset, SX_COMMON_SOFT_RESET);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 2000); /* power-up time is ~1ms. */
+
+ /* Clear reset interrupt state by reading SX_COMMON_REG_IRQ_SRC. */
+ ret = regmap_read(data->regmap, SX_COMMON_REG_IRQ_SRC, &val);
+ if (ret)
+ return ret;
+
+ /* Program defaults from constant or BIOS. */
+ for (i = 0; i < data->chip_info->num_default_regs; i++) {
+ initval = data->chip_info->ops.get_default_reg(&indio_dev->dev,
+ i, &tmp);
+ ret = regmap_write(data->regmap, initval->reg, initval->def);
+ if (ret)
+ return ret;
+ }
+
+ return data->chip_info->ops.init_compensation(indio_dev);
+}
+
+/**
+ * sx_common_probe() - Common setup for Semtech SAR sensor
+ *
+ * @client: I2C client object
+ * @chip_info: Semtech sensor chip information.
+ * @regmap_config: Sensor registers map configuration.
+ */
+int sx_common_probe(struct i2c_client *client,
+ const struct sx_common_chip_info *chip_info,
+ const struct regmap_config *regmap_config)
+{
+ struct device *dev = &client->dev;
+ struct iio_dev *indio_dev;
+ struct sx_common_data *data;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+
+ data->chip_info = chip_info;
+ data->client = client;
+ data->supplies[0].supply = "vdd";
+ data->supplies[1].supply = "svdd";
+ mutex_init(&data->mutex);
+ init_completion(&data->completion);
+
+ data->regmap = devm_regmap_init_i2c(client, regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret)
+ return ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+ if (ret)
+ return ret;
+ /* Must wait for Tpor time after initial power up */
+ usleep_range(1000, 1100);
+
+ ret = devm_add_action_or_reset(dev, sx_common_regulator_disable, data);
+ if (ret)
+ return ret;
+
+ ret = data->chip_info->ops.check_whoami(dev, indio_dev);
+ if (ret) {
+ dev_err(dev, "error in reading WHOAMI register: %d", ret);
+ return ret;
+ }
+
+ ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(dev));
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ indio_dev->channels = data->chip_info->iio_channels;
+ indio_dev->num_channels = data->chip_info->num_iio_channels;
+ indio_dev->info = &data->chip_info->iio_info;
+
+ i2c_set_clientdata(client, indio_dev);
+
+ ret = sx_common_init_device(indio_dev);
+ if (ret)
+ return ret;
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(dev, client->irq,
+ sx_common_irq_handler,
+ sx_common_irq_thread_handler,
+ IRQF_ONESHOT,
+ "sx_event", indio_dev);
+ if (ret)
+ return ret;
+
+ data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+ indio_dev->name,
+ iio_device_id(indio_dev));
+ if (!data->trig)
+ return -ENOMEM;
+
+ data->trig->ops = &sx_common_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(dev, data->trig);
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ iio_pollfunc_store_time,
+ sx_common_trigger_handler,
+ &sx_common_buffer_setup_ops);
+ if (ret)
+ return ret;
+
+ return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_GPL(sx_common_probe);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Common functions and structures for Semtech sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/proximity/sx_common.h b/drivers/iio/proximity/sx_common.h
new file mode 100644
index 00000000000000..808c5fe44cf8eb
--- /dev/null
+++ b/drivers/iio/proximity/sx_common.h
@@ -0,0 +1,155 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Code shared between most Semtech SAR sensor driver.
+ */
+
+#ifndef IIO_SX_COMMON_H
+#define IIO_SX_COMMON_H
+
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define SX_COMMON_REG_IRQ_SRC 0x00
+
+#define SX_COMMON_MAX_NUM_CHANNELS 4
+static_assert(SX_COMMON_MAX_NUM_CHANNELS < BITS_PER_LONG);
+
+struct sx_common_data;
+
+struct sx_common_reg_default {
+ u8 reg;
+ u8 def;
+};
+
+/**
+ * struct sx_common_ops: function pointers needed by common code
+ *
+ * List functions needed by common code to gather information or configure
+ * the sensor.
+ *
+ * @read_prox_data: Function to read raw proximity data.
+ * @check_whoami: Set device name based on whoami register.
+ * @init_compensation: Function to set initial compensation.
+ * @wait_for_sample: When there are no physical IRQ, function to wait for a
+ * sample to be ready.
+ * @get_default_reg: Populate the initial value for a given register.
+ */
+struct sx_common_ops {
+ int (*read_prox_data)(struct sx_common_data *data,
+ const struct iio_chan_spec *chan, __be16 *val);
+ int (*check_whoami)(struct device *dev, struct iio_dev *indio_dev);
+ int (*init_compensation)(struct iio_dev *indio_dev);
+ int (*wait_for_sample)(struct sx_common_data *data);
+ const struct sx_common_reg_default *
+ (*get_default_reg)(struct device *dev, int idx,
+ struct sx_common_reg_default *reg_def);
+};
+
+/**
+ * struct sx_common_chip_info: Semtech Sensor private chip information
+ *
+ * @reg_stat: Main status register address.
+ * @reg_irq_msk: IRQ mask register address.
+ * @reg_enable_chan: Address to enable/disable channels/phases.
+ * @reg_reset: Reset register address.
+ *
+ * @mask_enable_chan: Mask over the channels bits in the enable channel
+ * register.
+ * @irq_msk_offset: Offset to enable interrupt in the IRQ mask
+ * register.
+ *
+ * @num_channels: Number of channel/phase.
+ * @num_default_regs: Number of internal registers that can be configured.
+ *
+ * @ops: Private functions pointers.
+ *
+ * @iio_channels: Description of exposed iio channels.
+ * @num_iio_channels: Number of iio_channels.
+ * @iio_info: iio_info structure for this driver.
+ *
+ */
+struct sx_common_chip_info {
+ unsigned int reg_stat;
+ unsigned int reg_irq_msk;
+ unsigned int reg_enable_chan;
+ unsigned int reg_reset;
+
+ unsigned int mask_enable_chan;
+ unsigned int irq_msk_offset;
+ unsigned int num_channels;
+ int num_default_regs;
+
+ struct sx_common_ops ops;
+
+ const struct iio_chan_spec *iio_channels;
+ int num_iio_channels;
+ struct iio_info iio_info;
+};
+
+/**
+ * struct sx_common_data: Semtech Sensor private data structure.
+ *
+ * @chip_info: Structure defining sensor internals.
+ * @mutex: Serialize access to registers and channel configuration.
+ * @num_channels: Number of channel/phase.
+ * @completion: completion object to wait for data acquisition.
+ * @client: I2C client structure.
+ * @trig: IIO trigger object.
+ * @regmap: Register map.
+ *
+ * @num_default_regs: Number of default registers to set at init.
+ * @supplies: Power supplies object.
+ * @chan_prox_stat: Last reading of the proximity status for each channel.
+ * We only send an event to user space when this changes.
+ * @trigger_enabled: True when the device trigger is enabled.
+ *
+ * @buffer: Bufffer to store raw samples.
+ * @suspend_ctrl: Remember enabled channels and sample rate during suspend.
+ * @chan_read: Bit field for each raw channel enabled.
+ * @chan_event: Bit field for each event enabled.
+ *
+ */
+struct sx_common_data {
+ const struct sx_common_chip_info *chip_info;
+
+ struct mutex mutex;
+ struct completion completion;
+ struct i2c_client *client;
+ struct iio_trigger *trig;
+ struct regmap *regmap;
+
+ struct regulator_bulk_data supplies[2];
+ unsigned long chan_prox_stat;
+ bool trigger_enabled;
+
+ /* Ensure correct alignment of timestamp when present. */
+ struct {
+ __be16 channels[SX_COMMON_MAX_NUM_CHANNELS];
+ s64 ts __aligned(8);
+ } buffer;
+
+ unsigned int suspend_ctrl;
+ unsigned long chan_read;
+ unsigned long chan_event;
+};
+
+int sx_common_read_proximity(struct sx_common_data *data,
+ const struct iio_chan_spec *chan, int *val);
+
+int sx_common_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir);
+int sx_common_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir, int state);
+
+int sx_common_probe(struct i2c_client *client,
+ const struct sx_common_chip_info *chip_info,
+ const struct regmap_config *regmap_config);
+
+/* 3 is the number of events defined by a single phase. */
+extern const struct iio_event_spec sx_common_events[3];
+
+#endif /* IIO_SX_COMMON_H */
--
2.34.0.rc2.393.gf8c9666880-goog
