Add a new Semtech SAR sensor SX9324. Instead of recopying 1/3 of the sx9310 driver, move common code in a new file. It will be used again for the next sensor, SX9360. Major changes in v4: Use chip_info instead of info in common data. Returns an error when setting negative sysfs entries Fix cut and paste errors, credit. Major changes in v3: Fix some error in binding descriptions and setting Fix invalid register constant name. Major changes in v2: Better interface between common code and drivers Document SX9324 phase configuration Gwendal Grignou (5): iio: sx9310: Add frequency in read_avail iio: sx9310: Extract common Semtech sensor logic iio: proximity: Add SX9324 support dt-bindings: iio: Add sx9324 binding iio: sx9324: Add dt_binding support .../ABI/testing/sysfs-bus-iio-sx9324 | 28 + .../iio/proximity/semtech,sx9324.yaml | 161 +++ drivers/iio/proximity/Kconfig | 18 + drivers/iio/proximity/Makefile | 2 + drivers/iio/proximity/sx9310.c | 704 ++--------- drivers/iio/proximity/sx9324.c | 1074 +++++++++++++++++ drivers/iio/proximity/sx_common.c | 568 +++++++++ drivers/iio/proximity/sx_common.h | 155 +++ 8 files changed, 2109 insertions(+), 601 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9324 create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml create mode 100644 drivers/iio/proximity/sx9324.c create mode 100644 drivers/iio/proximity/sx_common.c create mode 100644 drivers/iio/proximity/sx_common.h -- 2.34.0.rc2.393.gf8c9666880-goog
