On Fri, 5 Nov 2021 13:29:27 +0200 Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote: > The AD7293 is a Power Amplifier drain current controller containing > functionality for general-purpose monitoring and control of > current, voltage, and temperature, integrated into a single chip > solution with an SPI-compatible interface. > > Datasheet: > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7293.pdf Wrong cover letter. This had me rather confused for a few moments as I had two copies of this in my inbox with different patches underneath! > > This series of patches provide an initial implementation of the > driver with access from the userspace to the: > - ADC channels (read raw values, set range, set offset) > - DAC channels (set code, set offset) > - Temperature sensing (read raw values, set offset) > - Current sensing (read raw, set offset, set gain) > > Antoniu Miclaus (2): > iio:amplifiers:ad7293: add support for AD7293 > dt-bindings:iio:amplifiers: add ad7293 doc > > .../bindings/iio/amplifiers/adi,ad7293.yaml | 49 ++ > drivers/iio/amplifiers/Kconfig | 11 + > drivers/iio/amplifiers/Makefile | 1 + > drivers/iio/amplifiers/ad7293.c | 794 ++++++++++++++++++ > 4 files changed, 855 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml > create mode 100644 drivers/iio/amplifiers/ad7293.c >
