[PATCH 0/2] Add support for AD7293 Power Amplifier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The AD7293 is a Power Amplifier drain current controller containing 
functionality for general-purpose monitoring and control of 
current, voltage, and temperature, integrated into a single chip 
solution with an SPI-compatible interface.

Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/AD7293.pdf

This series of patches provide an initial implementation of the
driver with access from the userspace to the:
 - ADC channels (read raw values, set range, set offset)
 - DAC channels (set code, set offset)
 - Temperature sensing (read raw values, set offset)
 - Current sensing (read raw, set offset, set gain)

Antoniu Miclaus (2):
  iio:amplifiers:ad7293: add support for AD7293
  dt-bindings:iio:amplifiers: add ad7293 doc

 .../bindings/iio/amplifiers/adi,ad7293.yaml   |  49 ++
 drivers/iio/amplifiers/Kconfig                |  11 +
 drivers/iio/amplifiers/Makefile               |   1 +
 drivers/iio/amplifiers/ad7293.c               | 794 ++++++++++++++++++
 4 files changed, 855 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,ad7293.yaml
 create mode 100644 drivers/iio/amplifiers/ad7293.c

-- 
2.33.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux