On Mon, 2 Aug 2021 17:56:53 +0200 Stephan Gerhold <stephan@xxxxxxxxxxx> wrote: > This series makes it possible to set up interrupts with the BMC150 driver > on boards where only the INT2 pin is connected (and not INT1). This is > particularly always the case for BMC156 since for some reason it only > has the INT2 pin and not the INT1 pin. > > These changes were already partially discussed here: > https://lore.kernel.org/linux-iio/YMOphuXSoODIVX06@xxxxxxxxxxx/ Hopefully one of us or someone else will come back to this and figure out a clean solution to generic fw support for getting named IRQs. In the meantime this will be fine for this particular driver. Some fun to look forwards to ;) Applied to the togreg branch of iio.git and pushed out as testing for 0-day to poke at it and see what we missed. Thanks, Jonathan > > Changes in v2: > - PATCH 1/4: Clarify order of "interrupts" with "interrupt-names" > - PATCH 4/4: Wrap a long line, clarify BOSCH_UNKNOWN with a comment > > v1: https://lore.kernel.org/linux-iio/20210719112156.27087-1-stephan@xxxxxxxxxxx/ > > Stephan Gerhold (4): > dt-bindings: iio: accel: bma255: Add interrupt-names > dt-bindings: iio: accel: bma255: Add bosch,bmc156_accel > iio: accel: bmc150: Make it possible to configure INT2 instead of INT1 > iio: accel: bmc150: Add support for BMC156 > > .../bindings/iio/accel/bosch,bma255.yaml | 34 +++++++- > drivers/iio/accel/Kconfig | 5 +- > drivers/iio/accel/bmc150-accel-core.c | 78 +++++++++++++++---- > drivers/iio/accel/bmc150-accel-i2c.c | 10 ++- > drivers/iio/accel/bmc150-accel-spi.c | 10 ++- > drivers/iio/accel/bmc150-accel.h | 20 ++++- > 6 files changed, 134 insertions(+), 23 deletions(-) >
