According to the BMA253 datasheet [1] and BMA250 datasheet [2] BMA25x also supports a bandwidth of 500 Hz and 1000 Hz but this was not listed in the driver for some reason. Add it to the bw_table to make the driver match the datasheet. [1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf [2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf Cc: Peter Meerwald <pmeerw@xxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> --- drivers/iio/accel/bma180.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c index 81d1e070a2ee..e7c6b3096cb7 100644 --- a/drivers/iio/accel/bma180.c +++ b/drivers/iio/accel/bma180.c @@ -184,7 +184,7 @@ static int bma023_scale_table[] = { 2452, 4903, 9709, }; static int bma180_bw_table[] = { 10, 20, 40, 75, 150, 300 }; /* Hz */ static int bma180_scale_table[] = { 1275, 1863, 2452, 3727, 4903, 9709, 19417 }; -static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250 }; /* Hz */ +static int bma25x_bw_table[] = { 8, 16, 31, 63, 125, 250, 500, 1000 }; /* Hz */ static int bma25x_scale_table[] = { 0, 0, 0, 38344, 0, 76590, 0, 0, 153180, 0, 0, 0, 306458 }; -- 2.31.1
